{
  "id": "green-coffee-quality-control",
  "url": "https://coffearium.org/entries/green-coffee-quality-control/",
  "license": "CC-BY-4.0",
  "title": "Green coffee quality control",
  "summary": "How exporters, importers and roasters check green coffee lots – when samples are tested, the test panel from moisture to cupping, food-safety screening, accepting or claiming against the contract, records and instrument checks.",
  "domain": "trade",
  "kind": "Practice",
  "stage": "trade",
  "topics": [],
  "topicSections": {},
  "lang": "en",
  "status": "verified",
  "reviewer": "Coffearium verification pass",
  "lastVerified": "2026-11-10T00:00:00.000Z",
  "literatureSearched": "2026-11-10T00:00:00.000Z",
  "updated": "2026-11-16T00:00:00.000Z",
  "added": "2026-11-10T00:00:00.000Z",
  "brief": [
    "The sampling standard for bagged green coffee, ISO 4072, names quality control and quality inspection among the purposes for which samples are drawn.<sup><a href=\"#src-s2\">2</a></sup>",
    "Moisture is measured by the ISO 6673 oven method (about 10 g at 105 °C for 16 h) or by meters calibrated against it; ISO 24115 sets the calibration procedure.<sup><a href=\"#src-s4\">4</a>,<a href=\"#src-s6\">6</a>,<a href=\"#src-s11\">11</a></sup>",
    "In the interlaboratory test of the ISO 6673 oven method, the reproducibility limit between laboratories was 0.54–1.19 percentage points across five green coffee samples.<sup><a href=\"#src-s4\">4</a></sup>",
    "The EU sets maximum levels of ochratoxin A for roasted and soluble coffee but none for green coffee.<sup><a href=\"#src-s18\">18</a></sup>",
    "Under the 2018 European Standard Contract for Coffee (ESCC), a quality difference established by arbitration entitles the buyer to an allowance, a reduction in price.<sup><a href=\"#src-s15\">15</a></sup>"
  ],
  "quickFacts": [
    {
      "label": "Checkpoints",
      "value": "Offer, pre-shipment, arrival, storage, before roasting"
    },
    {
      "label": "Reference moisture method",
      "value": "ISO 6673: about 10 g, 105 °C, 16 h ± 0.5 h, two determinations"
    },
    {
      "label": "Meter calibration",
      "value": "ISO 24115: at least 5 reference samples, validated range 8.5–13.5%, at least 3 readings each"
    },
    {
      "label": "Codex moisture ceiling",
      "value": "Not above 12.5% (wet basis) from loading to roasting"
    },
    {
      "label": "ICO export limits (2004)",
      "value": "Moisture 8–12.5% by ISO 6673; at most 86 defects (arabica) or 150 (robusta) per 300 g"
    },
    {
      "label": "EU ochratoxin A maximum",
      "value": "None for green coffee; 3.0 µg/kg roasted; 5.0 µg/kg soluble"
    },
    {
      "label": "Sample roast (SCA 102-2024)",
      "value": "Medium (ground L* 26–29), air-cooled, rested 8–24 h"
    },
    {
      "label": "Quality claim window",
      "value": "ESCC: 28 calendar days from final discharge; GCA shipment terms: 15 calendar days after discharge"
    }
  ],
  "aka": [
    "Green coffee QC",
    "Quality control of green coffee",
    "Green coffee inspection",
    "Incoming inspection of green coffee"
  ],
  "linkTerms": [
    "green coffee quality control",
    "quality control of green coffee",
    "green coffee QC",
    "arrival inspection",
    "incoming inspection",
    "pre-shipment inspection",
    "pre-roast check",
    "moisture meter calibration",
    "calibration of moisture meters",
    "ISO 24115",
    "reproducibility limit",
    "repeatability limit"
  ],
  "related": [
    "samples-in-the-trade",
    "green-coffee-grading",
    "grading-and-sorting",
    "moisture-and-water-activity",
    "bean-size-and-density",
    "cupping",
    "processing-defects",
    "ochratoxin-a",
    "contaminants-and-food-safety",
    "green-coffee-storage",
    "green-coffee-contracts",
    "arbitration",
    "import-and-customs",
    "shipping-green-coffee"
  ],
  "contested": [],
  "corrections": [
    {
      "date": "2026-11-16T00:00:00.000Z",
      "change": "The University of Hawai‘i extension guide EN-3 (source 7) is now Tier B. Its advice to check stored coffee 'once a month' rested on it alone and now reads 'at regular intervals'; its other uses (how meters work, drift, calibration, repeatability, re-checks in storage) carry no numbers and stay, attributed.",
      "reason": "Tier decision of 8 Nov 2026: state university extension fact sheets without stated review are Tier B, and a Tier B source never carries a number alone."
    }
  ],
  "sources": [
    {
      "id": "s1",
      "title": "Code of Practice for the Prevention and Reduction of Ochratoxin A Contamination in Coffee (CAC/RCP 69-2009)",
      "authors": "Codex Alimentarius Commission (FAO/WHO)",
      "year": 2009,
      "publisher": "Codex Alimentarius",
      "url": "https://www.fao.org/input/download/standards/11250/CXP_069e.pdf",
      "tier": "A",
      "tierNote": "Paragraphs used: 38(d)(7) and 38(f) (moisture equipment and calibration), 42 (long-term storage), 43 (out-sorted defects and OTA analysis), 46 (storage, transport and trading: rapid assessment, records, labelling) and 47 (ship transport). The code does not mention HACCP.",
      "quote": "a maximum aw of 0.67 to 0.70 and moisture content < 12.5% (wet basis) is sufficient for protecting parchment coffee from damage by fungi.",
      "quotes": [
        {
          "text": "Moisture content measures should be calibrated to ISO 6673 method.",
          "for": "calibration to ISO 6673 (para. 38(d)(7))"
        },
        {
          "text": "calibrated once a year before harvest against the ISO 6673 method.",
          "for": "annual calibration before harvest (para. 38(f))"
        },
        {
          "text": "unless representative sampling plan and direct OTA analysis has shown them to be acceptable.",
          "for": "out-sorted defects and OTA analysis (para. 43)"
        },
        {
          "text": "refuse suspect coffee and avoid practices that could generate or increase a problem.",
          "for": "refusing suspect coffee (para. 46)"
        },
        {
          "text": "Minimum hygiene requirements and a rapid assessment method",
          "for": "rapid assessment of incoming coffee (para. 46(a))"
        },
        {
          "text": "Record initial condition and age of the received stocks.",
          "for": "records of received stocks (para. 46(c)(1))"
        },
        {
          "text": "This requires planning of the storage area and adoption of a labelling system.",
          "for": "labelling system in the store (para. 46(c)(5))"
        },
        {
          "text": "In long term storage conditions, humidity should be kept under strict control.",
          "for": "humidity in long-term storage (para. 42)"
        },
        {
          "text": "Check coffee lots to ensure that they are uniformly dried and below 12.5% moisture content",
          "for": "check before loading (para. 47(b))"
        },
        {
          "text": "to the point at which the coffee is unloaded, stored and/or subjected to other processing procedures such as roasting.",
          "for": "12.5% up to roasting (para. 47(h))"
        }
      ],
      "scope": {
        "claim": "guidance",
        "context": "International code of practice for the whole coffee chain, 2009.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s2",
      "title": "Arabica coffee manual for Lao-PDR, Chapter 8: Quality and export standards",
      "authors": "Winston, E.; Op de Laak, J.; Marsh, T.; Lempke, H.; Chapman, K.",
      "year": 2005,
      "publisher": "FAO Regional Office for Asia and the Pacific, Bangkok",
      "url": "https://www.fao.org/4/ae939e/ae939e0a.htm",
      "tier": "A",
      "tierNote": "FAO manual (same source as in Samples in the trade and Green coffee grading). It reproduces the text of ISO 4072:1982; the ISO text itself could not be accessed. Clause numbers are those of the reproduction.",
      "quote": "The quantity of not less than 300 g of green coffee beans removed from the blended bulk sample",
      "quotes": [
        {
          "text": "for quality control or quality inspection",
          "for": "purposes of sampling"
        },
        {
          "text": "internationally traded coffee is normally sold subject to the buyer receiving a representative sample",
          "for": "sale subject to a representative sample"
        },
        {
          "text": "Sampling shall be carried out by experienced samplers or samplers qualified by training,",
          "for": "who samples"
        },
        {
          "text": "The quantity of 30 ± 6 g of green coffee beans taken from a single bag or a specific lot.",
          "for": "increment 30 ± 6 g (3.5)"
        },
        {
          "text": "shall be not less than 10 if there are 10 to 100 bags in the lot",
          "for": "number of bags"
        },
        {
          "text": "shall be not less than 10% of the total if there are more than 100 bags in the lot.",
          "for": "10% of bags above 100"
        },
        {
          "text": "Each bag should preferably be sampled at three different points.",
          "for": "three points per bag"
        },
        {
          "text": "The quantity of not less than 1500 g of green coffee beans obtained by combining all the increments",
          "for": "bulk sample"
        },
        {
          "text": "shall be packed in moisture-proof containers fitted with airtight closures",
          "for": "moisture samples airtight"
        },
        {
          "text": "shall be retained in a container labelled in accordance with 10.2",
          "for": "rest of the bulk sample kept, labelled"
        }
      ],
      "scope": {
        "claim": "definition",
        "context": "Reproduction of ISO 4072:1982, sampling of green coffee in bags.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s3",
      "title": "ISO 6666:2011 Coffee sampling — Triers for green coffee or raw coffee and parchment coffee",
      "authors": "International Organization for Standardization (ISO/TC 34/SC 15)",
      "year": 2011,
      "publisher": "ISO",
      "url": "https://www.iso.org/standard/44606.html",
      "tier": "A",
      "tierNote": "ISO catalogue page; A for the standard's title, scope and status only (full text not openly available). Last reviewed and confirmed in 2017.",
      "quote": "is particularly suitable for sampling based on ISO 4072",
      "quotes": [
        {
          "text": "suitable for taking samples through the sides of closed bags",
          "for": "sampling through closed bags"
        }
      ],
      "scope": {
        "claim": "description",
        "context": "ISO catalogue abstract of ISO 6666:2011.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s4",
      "title": "ISO 6673:2003 Green coffee — Determination of loss in mass at 105 °C",
      "authors": "International Organization for Standardization",
      "year": 2003,
      "publisher": "ISO",
      "url": "https://cdn.standards.iteh.ai/samples/38375/65dea88d3d9e4129abb9b7fe1b84a080/ISO-6673-2003.pdf",
      "tier": "A",
      "tierNote": "Publisher's preview of the 2003 edition (same source as in Moisture and water activity). Clauses used: 4 (principle), 5.1 (oven), 7.2–7.4 (procedure), 8 (expression of results) and 9 with Table 1 (precision). Table 1, read in the preview: 14 laboratories took part, 13 retained after outliers; five samples A–E with means 8.50, 9.11, 9.14, 11.10 and 11.40%; repeatability limit r 0.25, 0.11, 0.17, 0.25, 0.34; reproducibility limit R 0.59, 1.19, 0.93, 0.54, 0.62 (r and R = 2.83 × the standard deviations). The table is stored by its title. A 2025 edition (source 5) replaces this one.",
      "quote": "A test portion is heated at 105 °C for 16 h at atmospheric pressure.",
      "quotes": [
        {
          "text": "Place a test portion of approximately 10 g into the prepared dish",
          "for": "test portion"
        },
        {
          "text": "Carry out two determinations on the same test sample.",
          "for": "two determinations"
        },
        {
          "text": "Take as the result the arithmetic means of the two determinations",
          "for": "result as the mean"
        },
        {
          "text": "Oven, electrically heated, fitted with a system of forced ventilation and capable of being controlled at 105 °C ± 1 °C.",
          "for": "oven"
        },
        {
          "text": "An interlaboratory test, carried out at the international level, in which 14 laboratories participated",
          "for": "interlaboratory test (clause 9)"
        },
        {
          "text": "Statistical results",
          "for": "Table 1, precision data"
        }
      ],
      "scope": {
        "claim": "data",
        "context": "International standard method and its interlaboratory precision data, 2003 edition.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s5",
      "title": "ISO 6673:2025 Green coffee — Determination of loss in mass at 105 °C",
      "authors": "International Organization for Standardization",
      "year": 2025,
      "publisher": "ISO",
      "url": "https://www.iso.org/standard/87697.html",
      "tier": "A",
      "tierNote": "ISO catalogue page; edition 3, November 2025. A for title, scope and status only; whether the parameters or the precision data changed from 2003 could not be checked.",
      "quote": "This document specifies a method for the determination of the loss in mass at 105 °C of green coffee.",
      "quotes": [
        {
          "text": "is applicable to decaffeinated and non-decaffeinated green coffee as defined in ISO 3509.",
          "for": "decaffeinated and non-decaffeinated"
        }
      ],
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s6",
      "title": "ISO 24115:2012 Green coffee — Procedure for calibration of moisture meters — Routine method",
      "authors": "International Organization for Standardization (ISO/TC 34/SC 15)",
      "year": 2012,
      "publisher": "ISO",
      "url": "https://cdn.standards.iteh.ai/samples/44603/55f959bd9a884557b24ef123726ab237/ISO-24115-2012.pdf",
      "tier": "A",
      "tierNote": "Publisher's preview (clauses 1–7 and Annex A), the same kind of preview as for ISO 6673:2003 and ISO 4150 in other entries; catalogue page https://www.iso.org/standard/44603.html (edition 1, June 2012; last reviewed and confirmed in 2018). Annexes B–D are not in the preview and nothing from them is used. A copy hosted by the British Coffee Association and marked as a committee member copy is not linked or used (editor decision, 10 Nov 2026).",
      "quote": "This International Standard specifies a procedure for adjustment and subsequent calibration of moisture meters",
      "quotes": [
        {
          "text": "The RSs are green coffee beans of various moisture contents, determined by a standard method (ISO 6673).",
          "for": "reference samples measured by ISO 6673"
        },
        {
          "text": "This International Standard is applicable to green coffee as beans.",
          "for": "green coffee beans"
        },
        {
          "text": "The procedure shall be carried out at ambient temperature and at a relative humidity from 40 % to 70 %.",
          "for": "ambient temperature, 40–70% RH"
        },
        {
          "text": "At least three determinations shall be performed.",
          "for": "at least three readings per reference sample"
        },
        {
          "text": "For calculation, a linear regression is suitable in most cases.",
          "for": "linear regression"
        },
        {
          "text": "Decide the number, n (n ≥ 5), of RSs to be used in the calibration process.",
          "for": "at least five reference samples"
        },
        {
          "text": "The validated mass fraction range with ISO 6673 is 8,5% to 13,5%.",
          "for": "validated range 8.5–13.5%"
        },
        {
          "text": "generally k = 2 for a probability of 95 %",
          "for": "expanded uncertainty, k = 2"
        }
      ],
      "scope": {
        "claim": "definition",
        "context": "International standard for calibrating moisture meters for green coffee against ISO 6673; publisher's preview (clauses 1–7, Annex A).",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s7",
      "title": "Measuring Coffee Bean Moisture Content (Engineer's Notebook EN-3)",
      "authors": "Gautz, L. D.; Smith, V. E.; Bittenbender, H. C.",
      "year": 2008,
      "publisher": "College of Tropical Agriculture and Human Resources, University of Hawai'i at Mānoa",
      "url": "https://www.ctahr.hawaii.edu/oc/freepubs/pdf/EN-3.pdf",
      "tier": "B",
      "tierNote": "State university extension material without stated review: Tier B (tier decision of 8 Nov 2026). Used only for statements without numbers. Same source as in Moisture and water activity; the URL now redirects to www3.ctahr.hawaii.edu.",
      "quote": "The most-used moisture meters for coffee are adapted grain meters that measure capacitance.",
      "quotes": [
        {
          "text": "Modern capacitance moisture meters measure temperature, bulk density, and capacitance.",
          "for": "what meters measure"
        },
        {
          "text": "This drift can be corrected by calibration against a reference method such as oven drying (best)",
          "for": "drift and calibration"
        },
        {
          "text": "A meter that is not repeatable cannot be simply calibrated to increase accuracy.",
          "for": "repeatability"
        },
        {
          "text": "A meter can be made more precise by taking the average of the same sample presented multiple times.",
          "for": "averaging readings"
        },
        {
          "text": "A meter that needs frequent recalibration should be sent for repair or replaced.",
          "for": "frequent recalibration"
        },
        {
          "text": "Let the coffee cool to ambient temperature unless the meter has high-temperature capability.",
          "for": "sample temperature"
        },
        {
          "text": "check the moisture of your coffee once a month",
          "for": "regular checks in storage"
        },
        {
          "text": "If you are not controlling the storage air conditions, check it more frequently.",
          "for": "more often without climate control"
        }
      ],
      "scope": {
        "claim": "guidance",
        "context": "Extension guide for coffee growers and millers in Hawai'i, 2008.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s8",
      "title": "ISO 18787:2017 Foodstuffs — Determination of water activity",
      "authors": "International Organization for Standardization (ISO/TC 34)",
      "year": 2017,
      "publisher": "ISO",
      "url": "https://www.iso.org/standard/63379.html",
      "tier": "A",
      "tierNote": "ISO catalogue page; A for the standard's title, scope and status only. Edition 1, November 2017; last reviewed and confirmed in 2023. A general food method, not specific to coffee.",
      "quote": "The measurement principles are based on the dew-point measurement",
      "quotes": [
        {
          "text": "(aw) of food products for human consumption and animal feed within a measurement range of 0 to 1.",
          "for": "range 0 to 1"
        },
        {
          "text": "or on the determination of the change in electrical conductivity of an electrolyte",
          "for": "electrolytic principle"
        },
        {
          "text": "or in the permittivity of a polymer.",
          "for": "polymer sensor"
        }
      ],
      "scope": {
        "claim": "description",
        "context": "ISO catalogue abstract of ISO 18787:2017.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s9",
      "title": "ISO 6669:1995 Green and roasted coffee — Determination of free-flow bulk density of whole beans (Routine method)",
      "authors": "International Organization for Standardization (ISO/TC 34/SC 15)",
      "year": 1995,
      "publisher": "ISO (preview pages via ANSI Webstore)",
      "url": "https://webstore.ansi.org/preview-pages/ISO/preview_ISO+6669-1995.pdf",
      "tier": "A",
      "tierNote": "Standard; A for what it specifies and defines. Only the cover, foreword and introduction were openly available (same source as in Bean size and density).",
      "quote": "Bulk density is defined as the ratio of mass to volume occupied.",
      "quotes": [
        {
          "text": "variously influence the bulk density of green coffee beans",
          "for": "factors including age"
        }
      ],
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s10",
      "title": "ISO 4149:2025 Green coffee — Olfactory and visual examination and determination of foreign matter and defects",
      "authors": "International Organization for Standardization (ISO/TC 34/SC 15)",
      "year": 2025,
      "publisher": "ISO",
      "url": "https://www.iso.org/standard/87699.html",
      "tier": "A",
      "tierNote": "ISO catalogue page; edition 3, November 2025, replacing ISO 4149:2005 (withdrawn 21 Nov 2025). A for title, scope and status only.",
      "quote": "specifies methods for the olfactory and visual examination and determination of foreign matter and defects",
      "quotes": [],
      "scope": {
        "claim": "description",
        "context": "ISO catalogue abstract of ISO 4149:2025.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s11",
      "title": "A System to Assess Coffee Value: Understanding the Specialty Coffee Association’s Coffee Value Assessment (June 2024)",
      "authors": "Specialty Coffee Association (writing team Fernández-Alduenda, M.; Ionescu, K. E.; Giuliano, P.; Rugolo, J.; Delrue, R.)",
      "year": 2024,
      "publisher": "Specialty Coffee Association",
      "url": "https://static1.squarespace.com/static/584f6bbef5e23149e5522201/t/667182ffdde8a5081afc2d8c/1718715138872/SCA+-+A+System+to+Asssess+Coffee+Value+-+June+2024+(Secured).pdf",
      "tier": "A/B",
      "tierNote": "A for what the CVA itself specifies (physical assessment procedure, sample, colour categories, moisture method); B for its explanations",
      "quote": "Moisture testing shall be done with moisture meters calibrated against ISO 6673.",
      "quotes": [
        {
          "text": "Replicate measurements (3–5) should be performed",
          "for": "3–5 moisture readings"
        },
        {
          "text": "Water activity of green coffee and quaker count are not required physical tests.",
          "for": "water activity not required"
        },
        {
          "text": "results from physical assessment shall be concealed from tasters until after sensory evaluation is completed",
          "for": "physical results hidden from tasters"
        },
        {
          "text": "Mirroring the method in the Defect Guide, a 350 g sample of green coffee shall be used.",
          "for": "350 g defect sample"
        },
        {
          "text": "a 350 g sample of green coffee shall be compared visually against the color guide",
          "for": "colour on 350 g"
        }
      ],
      "scope": {
        "claim": "definition",
        "context": "SCA Coffee Value Assessment, physical assessment section; applies to washed arabica.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s12",
      "title": "SCA Standard 102-2024 Coffee Value Assessment: Sample Preparation and Tasting Mechanics",
      "authors": "Specialty Coffee Association",
      "year": 2024,
      "publisher": "Specialty Coffee Association",
      "url": "https://sca.coffee/s/AW_SCA-102_Sample-Preparation_281024_Secured.pdf",
      "tier": "A/B",
      "tierNote": "A for what the standard specifies; B for its explanations. The URL now redirects to a Squarespace copy dated 28.10.24.",
      "quote": "Once the cupping vessel volume is measured, the mass of coffee per cup is calculated at a ratio of 8.25 g of coffee per 150 mL of vessel capacity.",
      "quotes": [
        {
          "text": "The coffee sample shall be immediately air-cooled (without water quenching).",
          "for": "air cooling"
        },
        {
          "text": "Coffee should rest for 8 to 24 hours after roasting.",
          "for": "rest 8–24 h"
        },
        {
          "text": "The roast level for specialty coffee cupping should be what has mostly been described as “medium.”",
          "for": "medium roast (5.1.1)"
        },
        {
          "text": "lightness of the ground coffee (L* in the CIELAB coordinates) of 26–29",
          "for": "L* 26–29 (5.1.1)"
        },
        {
          "text": "a target reading of 63 in the Agtron “Gourmet” scale",
          "for": "Agtron Gourmet 63 (5.1.1)"
        },
        {
          "text": "Five cups per sample shall be tasted.",
          "for": "five cups (affective assessment)"
        },
        {
          "text": "should not be used for cupping, and the roast batch should be repeated.",
          "for": "off-target roasts repeated"
        }
      ],
      "scope": {
        "claim": "definition",
        "context": "SCA standard for sample roasting and cupping mechanics, 2024.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s13",
      "title": "ISO 6668:2008 Green coffee — Preparation of samples for use in sensory analysis",
      "authors": "International Organization for Standardization (ISO/TC 34/SC 15)",
      "year": 2008,
      "publisher": "ISO",
      "url": "https://www.iso.org/standard/44609.html",
      "tier": "A",
      "tierNote": "ISO catalogue page; A for the standard's title, scope and status only (full text not openly available). Edition 2, June 2008; last reviewed and confirmed in 2017.",
      "quote": "or rejection of a shipment of coffee, subject to agreement between the parties concerned.",
      "quotes": [],
      "scope": {
        "claim": "description",
        "context": "ISO catalogue abstract of ISO 6668:2008.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s14",
      "title": "Resolution Number 420: Coffee Quality-Improvement Programme – Modifications",
      "authors": "International Coffee Council",
      "year": 2004,
      "publisher": "International Coffee Organization, 90th Session, London",
      "url": "https://ico.org/wp-content/documents/iccres420e.pdf",
      "tier": "A",
      "tierNote": "ICO official resolution; A for what it requires. Whether later resolutions changed these targets was not checked.",
      "quote": "for Arabica, not to have more than 86 defects per 300 g sample",
      "quotes": [
        {
          "text": "for both Arabica and Robusta, not to have a moisture content below 8% or in excess of 12.5%,",
          "for": "moisture 8–12.5%"
        },
        {
          "text": "measured using the ISO 6673 method.",
          "for": "ISO 6673"
        },
        {
          "text": "“XD” if the coffee does not conform to the target defect standard,",
          "for": "XD mark"
        },
        {
          "text": "“XM” if the coffee does not conform to the target moisture standard and",
          "for": "XM mark"
        },
        {
          "text": "importing Members may notify the ICO of such shipments.",
          "for": "importers may notify the ICO"
        },
        {
          "text": "complete Box 17 in the ICO Certificate of Origin used to accompany each shipment of coffee",
          "for": "marking on the certificate of origin"
        }
      ],
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s15",
      "title": "European Standard Contract for Coffee (ESCC), 2018 Edition",
      "authors": "European Coffee Federation",
      "year": 2018,
      "publisher": "European Coffee Federation, Brussels (copy hosted by the Comitato Associazioni Italiane Caffè, CAIC)",
      "url": "https://www.caic1933.it/wp-content/uploads/2019/09/EUROPEAN-STANDARD-CONTRACT-FOR-COFFEE.-FINAL-VERSION-2018.pdf",
      "tier": "A/B",
      "tierNote": "The contract form itself; A for what its clauses state, B otherwise (same source as in Green coffee contracts and Arbitration). Shipment section Art. 7 (quality) and Art. 24 (claims).",
      "quote": "Any difference in quality established by arbitration shall entitle buyers to an allowance which may include compensation for costs and expenses.",
      "quotes": [
        {
          "text": "the buyers may seek an allowance or that the contract be discharged by invoicing back the coffee",
          "for": "unsound or radically different coffee (Art. 7(d))"
        },
        {
          "text": "One criterion as to whether coffee is unsound is an excessive moisture level.",
          "for": "excessive moisture"
        },
        {
          "text": "quality claims: not later than 28 calendar days from the final date of discharge at the port of destination",
          "for": "28-day quality claim (Art. 24)"
        }
      ],
      "scope": {
        "claim": "definition",
        "context": "Standard contract form of the European Coffee Federation, 2018; applies where the parties adopt it.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s16",
      "title": "Contract Terms and Conditions (effective May 1, 2002, as amended to September 27, 2021)",
      "authors": "Green Coffee Association",
      "year": 2021,
      "publisher": "Green Coffee Association, Inc., New York",
      "url": "https://greencoffeeassociation.org/wp-content/uploads/2021/09/GCA-Contract-eff-9-27-21.pdf",
      "tier": "A/B",
      "tierNote": "The contract form itself; A for what its terms state, B otherwise (same source as in Samples in the trade and Arbitration). Later amendments, if any, were not checked.",
      "quote": "any question of QUALITY submitted to quality arbitration, shall be a matter of allowance only",
      "quotes": [
        {
          "text": "On FCA, FOB, CFR, CIF, & DAF contracts, coffee shall be considered accepted as to quality unless within fifteen (15) calendar days after discharge of the Coffee",
          "for": "15-day acceptance"
        },
        {
          "text": "due consideration shall be given to dryage and reasonable color change",
          "for": "dryage and colour change"
        },
        {
          "text": "Maximum allowable moisture is also a specification that should be included",
          "for": "moisture in the quality description"
        },
        {
          "text": "refused admission into Port of Destination by reason of any violation of Governmental Laws or Acts",
          "for": "guarantee clause: refusal of entry"
        }
      ],
      "scope": {
        "claim": "definition",
        "context": "Standard contract form of the Green Coffee Association, New York, as amended to 27 September 2021; applies where the parties adopt it.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s17",
      "title": "Analysis Report MB-4583-6596/05: coffee in mini-containers during simulated maritime transport (FAO coffee project, Annex C.10)",
      "authors": "Palácios Cabrera, H. A.; Souza, J. L. de (Instituto de Tecnologia de Alimentos, ITAL)",
      "year": 2005,
      "publisher": "FAO / Instituto de Tecnologia de Alimentos (ITAL), Brazil",
      "url": "https://www.fao.org/fileadmin/user_upload/agns/pdf/coffee/Annex-C.10.pdf",
      "tier": "A",
      "tierNote": "Government laboratory report for an FAO project (same source as in Green coffee storage). Table 4 (container 1, full; means of three 15-day trials; hulled arabica): ISO 6673 oven 10.33/10.31/10.25% at the start and 10.45/10.39/10.55% at the end (lower/middle/upper layer); capacitance meter (Gehaka G 600) 12.29/12.26/12.30% and 12.51/12.53/12.70%; weight gain 10.33/10.43/10.31% and 11.77/11.07/11.85%. Basis not stated. Read again on 10 Nov 2026 (verification): all values confirmed. Meter minus oven per layer and time: 1.95–2.15 points; gain start to end per layer: oven 0.12/0.08/0.30, meter 0.22/0.27/0.40 points (our calculation). The authors' “less than 0.3%” is their own summary. Report dated 4 December 2005. The table is stored by its title.",
      "quote": "The following three methodologies for the determination of moisture content were compared:",
      "quotes": [
        {
          "text": "Comparison of the means for the determinations of moisture content and water activity (three trials) between the three regions of container 1",
          "for": "Table 4, container 1"
        },
        {
          "text": "since, using these methods, the moisture gain was less than 0.3%",
          "for": "oven and capacitance gain below 0.3%"
        },
        {
          "text": "the increase in moisture content was considered to be that obtained from the weight gain of the product",
          "for": "weight gain taken as the moisture increase"
        }
      ],
      "scope": {
        "claim": "data",
        "context": "Simulated maritime transport in three mini-containers, hulled arabica, Brazil, 2005; three trials of 15 days.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s18",
      "title": "Commission Regulation (EU) 2023/915 on maximum levels for certain contaminants in food (consolidated text, 01.01.2025), Annex I, section 1.2",
      "authors": "European Commission",
      "year": 2025,
      "publisher": "EUR-Lex",
      "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:02023R0915-20250101",
      "tier": "A",
      "tierNote": "Regulation; same source as in Ochratoxin A. Entries 1.2.14 (3,0 µg/kg) and 1.2.15 (5,0 µg/kg); no ochratoxin A entry names green or unroasted coffee.",
      "quote": "Roasted coffee beans and ground roasted coffee except products listed in 1.2.15",
      "quotes": [
        {
          "text": "Soluble coffee (instant coffee)",
          "for": "entry 1.2.15, 5.0 µg/kg"
        }
      ],
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s19",
      "title": "EVS-EN 14132:2009 Foodstuffs – Determination of ochratoxin A in barley and roasted coffee – HPLC method with immunoaffinity column clean-up",
      "authors": "European Committee for Standardization (CEN)",
      "year": 2009,
      "publisher": "Estonian Centre for Standardisation and Accreditation (catalogue page)",
      "url": "https://www.evs.ee/en/evs-en-14132-2009",
      "tier": "A",
      "tierNote": "Standard; only the scope on the catalogue page was read (same source as in Ochratoxin A).",
      "quote": "This European Standard specifies a method for the determination of ochratoxin A content in barley and roasted coffee",
      "quotes": [
        {
          "text": "and for roasted coffee in the range from 0,2 µg/kg up to 5,5 µg/kg",
          "for": "validated range, roasted coffee"
        }
      ],
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s20",
      "title": "A review on the pesticides in coffee: Usage, health effects, detection, and mitigation",
      "authors": "Merhi, A.; Kordahi, R.; Hassan, H. F.",
      "year": 2022,
      "publisher": "Frontiers in Public Health 10, 1004570",
      "url": "https://pmc.ncbi.nlm.nih.gov/articles/PMC9681499/",
      "doi": "10.3389/fpubh.2022.1004570",
      "tier": "A",
      "tierNote": "Peer-reviewed narrative review without a stated search strategy (same source as in Contaminants and food safety); used here only for what it says about analytical methods.",
      "quote": "In our case, coffee is considered a difficult matrix to work on.",
      "quotes": [
        {
          "text": "This is related to the large and broad peak of caffeine that blocks the analysis of the chromatogram.",
          "for": "caffeine interference"
        },
        {
          "text": "The role of C18 is to remove the lipids and esters.",
          "for": "lipid clean-up"
        },
        {
          "text": "LC is used when the limitation of the GC is reached.",
          "for": "LC when GC is unsuitable"
        }
      ],
      "scope": {
        "claim": "description",
        "context": "Narrative review of pesticide use, residues and detection in coffee, 2022.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s21",
      "title": "Regulation (EC) No 852/2004 of the European Parliament and of the Council of 29 April 2004 on the hygiene of foodstuffs",
      "authors": "European Parliament and Council of the European Union",
      "year": 2004,
      "publisher": "EUR-Lex (original text as published)",
      "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32004R0852",
      "tier": "A",
      "tierNote": "Original text. Articles 1(1)(a), 4(1), 5(1)–(4) and Annex I, Part A. Later amendments were not checked for these articles.",
      "quote": "primary responsibility for food safety rests with the food business operator;",
      "quotes": [
        {
          "text": "Food business operators shall put in place, implement and maintain a permanent procedure or procedures",
          "for": "HACCP-based procedures (Art. 5(1))"
        },
        {
          "text": "identifying any hazards that must be prevented, eliminated or reduced to acceptable levels;",
          "for": "hazard analysis (Art. 5(2)(a))"
        },
        {
          "text": "establishing critical limits at critical control points which separate acceptability from unacceptability",
          "for": "critical limits (Art. 5(2)(c))"
        },
        {
          "text": "establishing corrective actions when monitoring indicates that a critical control point is not under control;",
          "for": "corrective actions (Art. 5(2)(e))"
        },
        {
          "text": "establishing documents and records commensurate with the nature and size of the food business",
          "for": "records (Art. 5(2)(g))"
        },
        {
          "text": "carrying out any stage of production, processing and distribution of food after primary production",
          "for": "scope after primary production (Art. 5(3))"
        }
      ],
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s22",
      "title": "Effect of green and roasted coffee storage conditions on selected characteristic quality parameters",
      "authors": "Błaszkiewicz, J.; Nowakowska-Bogdan, E.; Barabosz, K.; Kulesza, R.; Dresler, E.; Woszczyński, P.; Biłos, Ł.; Matuszek, D. B.; Szkutnik, K.",
      "year": 2023,
      "publisher": "Scientific Reports 13, 6447",
      "url": "https://www.nature.com/articles/s41598-023-33609-x",
      "doi": "10.1038/s41598-023-33609-x",
      "tier": "A",
      "tierNote": "Same source as in Green coffee storage; used here for the parameters it measured on stored green coffee.",
      "quote": "FFAs analysis is one of the basic parameters of the quality of green coffee beans during storage.",
      "quotes": [
        {
          "text": "is suitable for monitoring the aging process by observing changes in VOCs concentrations",
          "for": "GC–MS for monitoring ageing"
        }
      ],
      "scope": {
        "claim": "finding",
        "context": "Washed and natural green coffee stored at −10, 10 and 20 °C for up to 12 months, Poland.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    },
    {
      "id": "s23",
      "title": "The Coffee Exporter's Guide, Third Edition",
      "authors": "International Trade Centre (ITC)",
      "year": 2011,
      "publisher": "International Trade Centre (UNCTAD/WTO), Geneva",
      "url": "https://bootcoffee.com/wp-content/uploads/2014/10/Coffee-Exporters-Guide-2012.pdf",
      "tier": "A",
      "tierNote": "Copy of the ITC guide hosted by a coffee company; the International Trade Centre is a joint agency of the UN and the WTO, so A as a publication of an international organisation (editor decision of 10 Nov 2026, delegated by the owner). Chapter 12, Quality control (pp. 210–221). Carries no number in this entry.",
      "quote": "This must be documented in a HACCP plan.",
      "quotes": [
        {
          "text": "Coffee quality is assessed in terms of the green appearance, the roast appearance and by taste (cup or liquor).",
          "for": "green, roast and cup (p. 220)"
        },
        {
          "text": "Any discrepancies found, and the countermeasures taken to correct them, must be registered.",
          "for": "recording discrepancies"
        },
        {
          "text": "ISO 9001 provides those who process their own coffee for export with identification and traceability",
          "for": "ISO 9001 and lot identity"
        },
        {
          "text": "Use correctly calibrated moisture meters and ensure all meters are recalibrated at the start of each season",
          "for": "recalibration each season"
        },
        {
          "text": "Careful inspection of visual appearance and any mouldy or earthy smells can be a useful tool for checking.",
          "for": "visual and smell checks"
        },
        {
          "text": "The liquorer's first objective is to determine if a coffee is acceptable in terms of type and standard.",
          "for": "cup test for acceptance"
        }
      ],
      "scope": {
        "claim": "guidance",
        "context": "Trade guide for exporters in producing countries, 2011.",
        "checked": "2026-11-10T00:00:00.000Z"
      },
      "accessed": "2026-11-10T00:00:00.000Z"
    }
  ],
  "markdown": "## What quality control does\n\nGreen coffee changes hands several times between the dry mill and the roaster. At each step someone checks it. A lot is a batch of coffee from one origin and process, traded as a unit. Quality control (QC) asks three questions about it: does it match what was sold, is it safe, and will it keep?\n\nThe checks work on samples, not on the whole lot.<sup><a href=\"#src-s2\">2</a></sup> The sampling standard for bagged green coffee, ISO 4072, names quality control and quality inspection among the purposes of a sample.<sup><a href=\"#src-s2\">2</a></sup> According to the International Trade Centre (ITC), quality is judged by the green appearance, the roast appearance and the cup.<sup><a href=\"#src-s23\">23</a></sup>\n\nThe yardstick is the contract. A lot is sold on a description, a sample or an agreed type; Samples in the trade explains these. The grades and defect tables the checks refer to are explained in Green coffee grading standards. This entry describes the system that applies them: when, how and with what instruments.\n\n## When coffee is checked\n\nThe same lot is checked at several points. The figure follows one lot from the offer to the roaster.\n\n<figure class=\"iso-fig iso-fig--below\">\n<div data-figure=\"green-coffee-quality-control-checkpoints\"></div>\n<ol class=\"fig-legend\">\n<li data-n=\"1\"><span><b>Offer.</b> The buyer grades and cups a sample of what is on offer.<sup><a href=\"#src-s2\">2</a>,<a href=\"#src-s23\">23</a></sup></span></li>\n<li data-n=\"2\"><span><b>Before shipment.</b> The exporter checks that the lot is evenly dried, below 12.5% moisture and within defect limits.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s14\">14</a></sup></span></li>\n<li data-n=\"3\"><span><b>Arrival.</b> Samples drawn after discharge are compared with the contract; the claim period starts.<sup><a href=\"#src-s15\">15</a>,<a href=\"#src-s16\">16</a></sup></span></li>\n<li data-n=\"4\"><span><b>Storage.</b> Moisture and condition of stored lots are re-checked; records note each lot's condition and age.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s7\">7</a></sup></span></li>\n<li data-n=\"5\"><span><b>Before roasting.</b> Moisture must still be within 12.5%; a cupping can decide acceptance if the parties agree.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s13\">13</a></sup></span></li>\n</ol>\n<figcaption>Quality control checkpoints for one lot of green coffee, from offer to roaster. Schematic, not to scale.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s2\">2</a>,<a href=\"#src-s15\">15</a>,<a href=\"#src-s16\">16</a></sup></figcaption>\n</figure>\n\n**Offer and pre-shipment.** According to an FAO manual, internationally traded coffee is normally sold after the buyer has received a representative sample.<sup><a href=\"#src-s2\">2</a></sup> Exporters also check their own lots before loading. The Codex code of practice on ochratoxin A asks that lots be uniformly dried, below 12.5% moisture and within defect limits before shipment.<sup><a href=\"#src-s1\">1</a></sup> A 2004 resolution of the International Coffee Organization (ICO) sets moisture and defect targets for exports.<sup><a href=\"#src-s14\">14</a></sup> The certificate of origin of each shipment shows whether it meets them.<sup><a href=\"#src-s14\">14</a></sup>\n\n**Arrival.** The buyer compares samples of the delivered coffee with the contract or approved sample. The contracts set short time limits for this (see \"Accept, claim or reject\" below).<sup><a href=\"#src-s15\">15</a>,<a href=\"#src-s16\">16</a></sup>\n\n**Storage and roasting.** Coffee can change in the warehouse, so stored lots are checked again.<sup><a href=\"#src-s7\">7</a></sup> The Codex code asks warehouses to record the condition and age of the stock they receive.<sup><a href=\"#src-s1\">1</a></sup> Its moisture ceiling of 12.5% applies until the coffee is roasted.<sup><a href=\"#src-s1\">1</a></sup>\n\n## The test panel\n\nA QC laboratory runs a short list of tests on each sample. Most have an international method. The values that define a grade are in Green coffee grading standards; the methods are summarised here.\n\n- **Moisture.** The reference is the oven method ISO 6673. About 10 g of beans are heated at 105 °C for 16 hours, and the loss in mass is weighed.<sup><a href=\"#src-s4\">4</a></sup> Day to day, laboratories use electronic meters calibrated against it.<sup><a href=\"#src-s11\">11</a></sup>\n- **Water activity.** Instruments measure it on a scale from 0 to 1.<sup><a href=\"#src-s8\">8</a></sup> The Codex code ties a low value, with low moisture, to protection from fungi.<sup><a href=\"#src-s1\">1</a></sup>\n- **Density and size.** Bulk density is the mass of beans that fills a known volume.<sup><a href=\"#src-s9\">9</a></sup> Screen size is measured with sieves; see Bean size and density.\n- **Defects, colour and odour.** A grader counts defective beans on a fixed sample, compares its colour with a chart and smells it for foreign or mouldy odours.<sup><a href=\"#src-s10\">10</a>,<a href=\"#src-s11\">11</a>,<a href=\"#src-s23\">23</a></sup>\n- **Sample roast and cupping.** A small batch is roasted to a set degree and tasted in several cups.<sup><a href=\"#src-s12\">12</a></sup>\n\nFood-safety tests are added where a risk is known. They look for ochratoxin A, a mould toxin, and for pesticide residues.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s20\">20</a></sup>\n\n## Accept, claim or reject\n\nThe result of QC is a decision. Most often the green coffee matches and is accepted. If it does not, the contract decides what happens.\n\nUnder the 2018 European Standard Contract for Coffee (ESCC), the buyer has 28 calendar days from final discharge to make a quality claim.<sup><a href=\"#src-s15\">15</a></sup> A quality difference established by arbitration gives the buyer an allowance, a reduction in price that may include costs.<sup><a href=\"#src-s15\">15</a></sup> Only coffee that is unsound, or radically different, can be invoiced back to the seller. Excessive moisture is one sign of unsound coffee.<sup><a href=\"#src-s15\">15</a></sup>\n\nThe contract of the Green Coffee Association (GCA) has a shorter window for shipment terms.<sup><a href=\"#src-s16\">16</a></sup> Coffee counts as accepted unless, within 15 calendar days of discharge, a claim is settled or arbitration samples are ordered.<sup><a href=\"#src-s16\">16</a></sup> Quality is then a matter of allowance only, unless the contract provides otherwise.<sup><a href=\"#src-s16\">16</a></sup> Arbitration explains how the samples are judged.\n\n## Records and lot identity\n\nA test result is only useful if it can be tied to the right lot. The Codex code asks warehouses to keep coffee types apart with a labelling system.<sup><a href=\"#src-s1\">1</a></sup> According to the ITC guide, the quality system ISO 9001 gives processors identification and traceability for their coffee.<sup><a href=\"#src-s23\">23</a></sup>\n\nRecords also show that the checks were done. Under EU food hygiene law, businesses after primary production keep documents and records that fit the nature and size of the business.<sup><a href=\"#src-s21\">21</a></sup> How lots are traced along the whole chain is covered in Traceability.\n\n<!-- deep-dive -->\n\n## Reference values\n\n| Parameter | Value | Source |\n|---|---|---|\n| Sampling of bagged lots (ISO 4072) | At least 10 bags in lots of 10–100 bags, at least 10% above 100; increments 30 ± 6 g, preferably 3 points per bag; bulk sample ≥ 1,500 g; laboratory sample ≥ 300 g | ISO 4072 as reproduced by FAO<sup><a href=\"#src-s2\">2</a></sup> |\n| Moisture, reference method | ISO 6673: ≈10 g test portion, oven with forced ventilation at 105 ± 1 °C, 16 h ± 0.5 h, two determinations, result = mean | ISO 6673:2003<sup><a href=\"#src-s4\">4</a></sup> |\n| ISO 6673 precision (5 samples, 8.50–11.40%) | Repeatability limit r 0.11–0.34; reproducibility limit R 0.54–1.19 (percentage points) | ISO 6673:2003, Table 1<sup><a href=\"#src-s4\">4</a></sup> |\n| Meter calibration (ISO 24115) | ≥ 5 reference samples; validated range 8.5–13.5%; ≥ 3 readings per reference sample; ambient temperature, 40–70% RH | ISO 24115<sup><a href=\"#src-s6\">6</a></sup> |\n| Meter readings per sample | 3–5 replicates | SCA CVA<sup><a href=\"#src-s11\">11</a></sup> |\n| Meter calibration interval | Once a year before harvest (Codex); at the start of each season (ITC) | Codex<sup><a href=\"#src-s1\">1</a></sup>, ITC<sup><a href=\"#src-s23\">23</a></sup> |\n| Same coffee, two methods (2005 container trial) | Oven 10.25–10.55%; capacitance meter 12.26–12.70% (basis not stated) | ITAL report<sup><a href=\"#src-s17\">17</a></sup> |\n| Moisture limits | ≤ 12.5% (wb) from loading to roasting (Codex); 8–12.5% by ISO 6673 (ICO export target) | Codex<sup><a href=\"#src-s1\">1</a></sup>, ICO<sup><a href=\"#src-s14\">14</a></sup> |\n| Water activity | ≤ 0.67–0.70 with < 12.5% moisture (wb) protects parchment coffee (Codex); not a required test in the SCA CVA | Codex<sup><a href=\"#src-s1\">1</a></sup>, SCA<sup><a href=\"#src-s11\">11</a></sup> |\n| Water activity method | ISO 18787: range 0–1; dew point, electrolyte or polymer sensor | ISO<sup><a href=\"#src-s8\">8</a></sup> |\n| Defect limits (ICO export target) | ≤ 86 defects per 300 g (arabica); ≤ 150 per 300 g (robusta) | ICO<sup><a href=\"#src-s14\">14</a></sup> |\n| Physical sample (SCA CVA) | 350 g for defects and colour | SCA<sup><a href=\"#src-s11\">11</a></sup> |\n| Sample roast | “Medium”: ground coffee L* 26–29, Agtron “Gourmet” 63; air-cooled; rest 8–24 h | SCA 102-2024<sup><a href=\"#src-s12\">12</a></sup> |\n| Cupping | 8.25 g per 150 mL; 5 cups per sample (affective assessment) | SCA 102-2024<sup><a href=\"#src-s12\">12</a></sup> |\n| Ochratoxin A, EU maximum | None for green coffee; 3.0 µg/kg roasted beans and ground roasted coffee; 5.0 µg/kg soluble coffee | Reg. (EU) 2023/915<sup><a href=\"#src-s18\">18</a></sup> |\n| Ochratoxin A, standard method | EN 14132, validated for roasted coffee 0.2–5.5 µg/kg | EN 14132<sup><a href=\"#src-s19\">19</a></sup> |\n| Quality claim windows | 28 calendar days from final discharge (ESCC); 15 calendar days after discharge (GCA shipment terms) | ESCC<sup><a href=\"#src-s15\">15</a></sup>, GCA<sup><a href=\"#src-s16\">16</a></sup> |\n\nMoisture values are mass fractions as each document gives them; the ISO standards use loss in mass by ISO 6673. Ranges for ISO 6673 are the lowest and highest values across its five samples.\n\n## Sampling and representativeness\n\nA test is only as good as the sample. ISO 4072 has sampling done by experienced or trained samplers.<sup><a href=\"#src-s2\">2</a></sup> It takes increments from at least 10 bags, or 10% of the bags above 100, preferably at three points in each bag.<sup><a href=\"#src-s2\">2</a></sup> The increments are combined into a bulk sample of at least 1,500 g, from which laboratory samples of at least 300 g are taken.<sup><a href=\"#src-s2\">2</a></sup> A bag trier to ISO 6666 takes beans through the side of a closed bag.<sup><a href=\"#src-s3\">3</a></sup>\n\nMoisture samples need their own packing. ISO 4072 puts them in moisture-proof containers with airtight closures, so they cannot dry or take up water before the test.<sup><a href=\"#src-s2\">2</a></sup> Bulk sampling, sample sizes in the contracts and sample retention are covered in Samples in the trade.\n\n## Moisture: reference method and meters\n\n**The oven method.** ISO 6673 heats a test portion of about 10 g at 105 ± 1 °C for 16 h ± 0.5 h, in an oven with forced ventilation.<sup><a href=\"#src-s4\">4</a></sup> Two determinations are made on the same sample, and the result is their mean.<sup><a href=\"#src-s4\">4</a></sup> The 2003 edition was replaced in November 2025 by a third edition that covers decaffeinated and non-decaffeinated green coffee.<sup><a href=\"#src-s5\">5</a></sup> Whether its parameters changed could not be checked for this entry.\n\n**Precision of the oven.** In an international interlaboratory test of ISO 6673, 14 laboratories took part and 13 were retained.<sup><a href=\"#src-s4\">4</a></sup> Across five samples of 8.50–11.40% moisture, the repeatability limit r, for results within one laboratory, was 0.11–0.34 percentage points.<sup><a href=\"#src-s4\">4</a></sup> The reproducibility limit R, for results from different laboratories, was 0.54–1.19 percentage points.<sup><a href=\"#src-s4\">4</a></sup> A buyer and a seller who both follow the method can therefore differ by up to about one point (our inference).\n\n**Meters.** The most used moisture meters for coffee are adapted grain meters that measure capacitance.<sup><a href=\"#src-s7\">7</a></sup> Modern units also measure temperature and bulk density, because both change the electrical reading.<sup><a href=\"#src-s7\">7</a></sup> Every electronic meter drifts; calibration against the oven method corrects the drift.<sup><a href=\"#src-s7\">7</a></sup> Calibration cannot correct poor repeatability, and a meter that needs frequent recalibration should be repaired or replaced.<sup><a href=\"#src-s7\">7</a></sup> Averaging several readings of the same sample makes a meter more precise.<sup><a href=\"#src-s7\">7</a></sup> The SCA's Coffee Value Assessment (CVA) asks for 3–5 replicate readings with a meter calibrated against ISO 6673.<sup><a href=\"#src-s11\">11</a></sup> Hot samples are cooled to ambient temperature first, unless the meter is rated for them.<sup><a href=\"#src-s7\">7</a></sup>\n\n**Calibration procedure.** ISO 24115 sets out how to adjust and calibrate a meter for green coffee.<sup><a href=\"#src-s6\">6</a></sup> At least five reference samples are prepared at different moisture levels, and their moisture is assigned by ISO 6673.<sup><a href=\"#src-s6\">6</a></sup> The validated range is 8.5–13.5%.<sup><a href=\"#src-s6\">6</a></sup> Each reference sample is read at least three times, at ambient temperature and 40–70% relative humidity.<sup><a href=\"#src-s6\">6</a></sup> The calibration curve relates meter readings to the reference values; a linear regression is usually suitable.<sup><a href=\"#src-s6\">6</a></sup> A correction term for bean temperature is worked out, and the result is reported with an expanded uncertainty for each moisture point, generally with a coverage factor k = 2 for 95%.<sup><a href=\"#src-s6\">6</a></sup>\n\n<figure>\n<div data-figure=\"green-coffee-quality-control-moisture-uncertainty\"></div>\n<figcaption>Spreads in moisture measurement of green coffee, in percentage points. The bars are different statistics: r and R are limits for the difference between two results; the last row is a systematic offset, our calculation from the layer means of the trial.<sup><a href=\"#src-s4\">4</a>,<a href=\"#src-s17\">17</a></sup></figcaption>\n</figure>\n\n**When methods disagree.** A 2005 Brazilian government laboratory report for an FAO project measured the same hulled arabica three ways during simulated sea transport.<sup><a href=\"#src-s17\">17</a></sup> In the full container, the oven gave 10.25–10.55% and a capacitance meter 12.26–12.70% (basis not stated).<sup><a href=\"#src-s17\">17</a></sup> Across the three layers, the oven read 10.25–10.33% at the start and 10.39–10.55% at the end; the meter read 12.26–12.30% and 12.51–12.70%.<sup><a href=\"#src-s17\">17</a></sup> The meter was 1.95–2.15 points higher in every layer and at both times (our calculation from the layer means).<sup><a href=\"#src-s17\">17</a></sup> The authors put the gain by either method at less than 0.3%.<sup><a href=\"#src-s17\">17</a></sup> By layer, the full container's means give gains of 0.08–0.30 points by oven and 0.22–0.40 by meter (our calculation).<sup><a href=\"#src-s17\">17</a></sup> A third method, weight gain, went from 10.31–10.43% to 11.07–11.85%, and the authors took it as the measure of moisture uptake.<sup><a href=\"#src-s17\">17</a></sup> An offset of this kind is what calibration against ISO 6673 removes.<sup><a href=\"#src-s6\">6</a>,<a href=\"#src-s7\">7</a></sup> Without it, a lot at 10.5% could read above the 12.5% Codex ceiling (our inference).<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s17\">17</a></sup>\n\n<figure>\n<div data-figure=\"green-coffee-quality-control-moisture-methods\"></div>\n<figcaption>Moisture of the same hulled arabica in the full container of a 2005 simulated-transport trial, by method, at the start and end; spans cover the lower, middle and upper layers (means of three 15-day trials; basis not stated).<sup><a href=\"#src-s17\">17</a></sup></figcaption>\n</figure>\n\n## Water activity, density, size, colour and odour\n\n**Water activity.** ISO 18787 covers water activity in foods across the range 0 to 1.<sup><a href=\"#src-s8\">8</a></sup> Its instruments work by dew point, by the conductivity of an electrolyte or by the permittivity of a polymer.<sup><a href=\"#src-s8\">8</a></sup> The Codex code considers parchment coffee protected from fungi at a water activity of at most 0.67–0.70 together with less than 12.5% moisture (wet basis).<sup><a href=\"#src-s1\">1</a></sup> The SCA CVA does not require the test.<sup><a href=\"#src-s11\">11</a></sup> Thresholds and isotherms are explained in Moisture and water activity.\n\n**Density and size.** ISO 6669 defines bulk density as the ratio of mass to the volume occupied, measured on free-flowing whole beans.<sup><a href=\"#src-s9\">9</a></sup> According to the standard, botanical, processing, storage and handling factors, including age, influence it.<sup><a href=\"#src-s9\">9</a></sup> No numeric acceptance limit for density was found in the standards consulted for this entry. Size analysis by sieving is described in Bean size and density.\n\n**Defects, colour and odour.** ISO 4149 specifies the olfactory and visual examination of green coffee and the determination of foreign matter and defects; its third edition appeared in November 2025.<sup><a href=\"#src-s10\">10</a></sup> The CVA counts defects and judges colour on a 350 g sample.<sup><a href=\"#src-s11\">11</a></sup> According to the ITC guide, a careful look and a check for mouldy or earthy smells help to detect mould.<sup><a href=\"#src-s23\">23</a></sup> Defect types and their counting are in Green coffee grading standards and Green coffee defects and their causes.\n\n## Sample roast and cupping\n\nThe cup decides many acceptances. ISO 6668 describes how green coffee samples are prepared for sensory analysis. Its scope states that the result may decide acceptance or rejection of a shipment, if the parties agree.<sup><a href=\"#src-s13\">13</a></sup> According to the ITC guide, the taster's first aim is to decide whether a coffee is acceptable for its type and standard.<sup><a href=\"#src-s23\">23</a></sup>\n\nSCA Standard 102-2024 fixes the sample roast at a “medium” degree, defined as a ground-coffee lightness L* of 26–29 or 63 on the Agtron “Gourmet” scale.<sup><a href=\"#src-s12\">12</a></sup> The sample is air-cooled without water and rests 8–24 hours.<sup><a href=\"#src-s12\">12</a></sup> Batches outside the target roast are not cupped; the roast is repeated.<sup><a href=\"#src-s12\">12</a></sup> The dose is 8.25 g per 150 mL of cup volume, and five cups per sample are tasted in the affective assessment.<sup><a href=\"#src-s12\">12</a></sup> The CVA keeps physical results from the tasters until the sensory work is finished.<sup><a href=\"#src-s11\">11</a></sup> The full protocol is in Cupping; roast quality control is outside this entry.\n\n## Food-safety screening\n\n**Ochratoxin A.** The EU sets maximum levels of 3.0 µg/kg for roasted beans and ground roasted coffee and 5.0 µg/kg for soluble coffee. No level names green coffee.<sup><a href=\"#src-s18\">18</a></sup> The legal limit therefore applies to the roaster's product, not to the green lot as traded (our reading). The Codex code allows out-sorted defects back into the food chain only if a representative sampling plan and direct OTA analysis show them to be acceptable.<sup><a href=\"#src-s1\">1</a></sup> The European standard method EN 14132 uses immunoaffinity clean-up and high-performance liquid chromatography (HPLC). It is validated for roasted coffee at 0.2–5.5 µg/kg.<sup><a href=\"#src-s19\">19</a></sup> Official sampling plans and the toxin itself are covered in Ochratoxin A.\n\n**Pesticide residues.** Residue testing on green coffee is described in a 2022 review as difficult. Coffee is a complex matrix; caffeine gives a large, broad peak that can hide residues in gas chromatography, and lipids must be removed in clean-up.<sup><a href=\"#src-s20\">20</a></sup> Liquid chromatography is used where gas chromatography reaches its limits.<sup><a href=\"#src-s20\">20</a></sup> Maximum residue levels are covered in Pesticide residues.\n\n**Refusal at the border.** Under the GCA guarantee clause, coffee refused admission at the port of destination for a violation of government laws is subject to replacement.<sup><a href=\"#src-s16\">16</a></sup> Border checks are described in Import and customs.\n\n## Food-safety management\n\nQC on green coffee sits inside a food-safety system. In the EU, the food business operator carries primary responsibility for food safety.<sup><a href=\"#src-s21\">21</a></sup> Regulation (EC) No 852/2004 requires operators after primary production to keep permanent procedures based on the principles of hazard analysis and critical control points (HACCP).<sup><a href=\"#src-s21\">21</a></sup> The principles include identifying hazards, setting critical limits that separate acceptable from unacceptable, corrective actions, verification and records.<sup><a href=\"#src-s21\">21</a></sup> Primary production falls under separate general hygiene provisions instead.<sup><a href=\"#src-s21\">21</a></sup>\n\nFor exporters, the ITC guide states that controls must be documented in a HACCP plan, and that discrepancies and the actions taken to correct them must be recorded.<sup><a href=\"#src-s23\">23</a></sup> For example, a moisture limit at receipt could serve as a critical limit, and segregation of a failed lot as the corrective action (our example, not taken from a source). The Codex code asks every stakeholder to refuse suspect coffee and to set up a rapid assessment of incoming coffee.<sup><a href=\"#src-s1\">1</a></sup>\n\n## Acceptance, claims and failed lots\n\n**Against what.** QC compares a result with the contract. The GCA contract advises that the maximum allowable moisture should be part of the quality description.<sup><a href=\"#src-s16\">16</a></sup> When an arrival sample is compared with the sample sold on, due consideration is given to dryage and a reasonable change in colour.<sup><a href=\"#src-s16\">16</a></sup> Some variation between pre-shipment and arrival results is therefore expected; how much the contract tolerates is not set as a number in the sources consulted.\n\n**Export targets.** The ICO resolution of 2004 marks shipments that miss its targets: “XD” for defects, “XM” for moisture, “XDM” for both.<sup><a href=\"#src-s14\">14</a></sup> If coffee marked as compliant fails in trade, importing members may notify the ICO.<sup><a href=\"#src-s14\">14</a></sup>\n\n**Remedies.** Under the ESCC, a quality difference gives an allowance, which may include costs; unsound or radically different coffee may be invoiced back.<sup><a href=\"#src-s15\">15</a></sup> Under GCA shipment terms, quality is a matter of allowance only.<sup><a href=\"#src-s16\">16</a></sup> Procedures, panels and awards are explained in Arbitration and Green coffee contracts.\n\n## Records, lot identity and instrument checks\n\n**Records.** EU law requires documents and records commensurate with the nature and size of the business, and up-to-date documents describing the procedures.<sup><a href=\"#src-s21\">21</a></sup> The Codex code asks warehouses to record the initial condition and age of the stocks they receive.<sup><a href=\"#src-s1\">1</a></sup>\n\n**Lot identity in the warehouse.** The Codex code has coffee types kept separate under a labelling system.<sup><a href=\"#src-s1\">1</a></sup> ISO 4072 keeps the rest of each bulk sample in a labelled container until the buyer accepts the consignment; see Samples in the trade.<sup><a href=\"#src-s2\">2</a></sup> Whole-chain systems are covered in Traceability.\n\n**Instrument checks.** The Codex code asks for moisture equipment to be cross-checked and calibrated once a year before harvest against ISO 6673.<sup><a href=\"#src-s1\">1</a></sup> The ITC guide asks for meters to be recalibrated at the start of each season.<sup><a href=\"#src-s23\">23</a></sup> ISO 24115 gives the procedure, including the correction for bean temperature and the expanded uncertainty.<sup><a href=\"#src-s6\">6</a></sup>\n\n## Monitoring stored lots\n\nStored coffee is re-tested because it changes. The Codex code asks for strict control of humidity in long-term storage.<sup><a href=\"#src-s1\">1</a></sup> A university extension guide advises checking the moisture of stored coffee at regular intervals, and more often where the storage air is not controlled.<sup><a href=\"#src-s7\">7</a></sup>\n\nMoisture alone does not show ageing. A 2023 storage study measured water activity, free fatty acids and volatile compounds in green coffee over 12 months.<sup><a href=\"#src-s22\">22</a></sup> The authors call free fatty acids one of the basic quality parameters of green coffee in storage. They found gas chromatography with mass spectrometry suitable for following ageing through volatile compounds.<sup><a href=\"#src-s22\">22</a></sup> No source consulted for this entry sets an interval for re-cupping stored lots. The effects of time and temperature are described in Green coffee storage.\n\n## Open questions\n\n- **Current ISO texts.** ISO 6673 and ISO 4149 appeared in new editions in November 2025; whether the oven parameters, precision data or examination methods changed could not be checked.<sup><a href=\"#src-s5\">5</a>,<a href=\"#src-s10\">10</a></sup>\n- **Meter agreement in trade.** Apart from the 2005 trial, no study consulted for this entry compares the moisture meters used by exporters and importers on the same lots.<sup><a href=\"#src-s17\">17</a></sup>\n- **Tolerances between pre-shipment and arrival.** The contracts allow for dryage and a reasonable change in colour but set no numeric tolerance in the sources consulted.<sup><a href=\"#src-s16\">16</a></sup>\n- **Water activity in acceptance.** Codex gives a ceiling; the SCA CVA does not require the test. No contract consulted sets a water activity limit.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s11\">11</a></sup>\n- **Re-test intervals.** No standard consulted sets how often stored lots should be re-cupped.\n\n## Key documents\n\n<div class=\"study\">\n<p><strong>ISO, 2003 – Green coffee: loss in mass at 105 °C (ISO 6673).</strong> The reference moisture method of the trade, with interlaboratory precision data from 13 laboratories. Two correct laboratories may differ by up to about one percentage point; a third edition appeared in 2025.</p>\n<p class=\"meta\">ISO 6673:2003 · <a href=\"https://cdn.standards.iteh.ai/samples/38375/65dea88d3d9e4129abb9b7fe1b84a080/ISO-6673-2003.pdf\">Preview</a> · <a href=\"https://www.iso.org/standard/87697.html\">ISO 6673:2025 catalogue</a></p>\n</div>\n\n<div class=\"study\">\n<p><strong>ISO, 2012 – Calibration of moisture meters for green coffee (ISO 24115).</strong> Sets out how to adjust a meter against at least five reference samples measured by ISO 6673, correct for bean temperature and state an expanded uncertainty.</p>\n<p class=\"meta\">ISO 24115:2012 · <a href=\"https://www.iso.org/standard/44603.html\">ISO catalogue</a></p>\n</div>\n\n<div class=\"study\">\n<p><strong>Palácios Cabrera and Souza, 2005 – Moisture methods in simulated sea transport.</strong> Measured the same hulled arabica by oven, capacitance meter and weight gain in three mini-containers. The meter read about two points above the oven throughout, while both showed only a small gain.</p>\n<p class=\"meta\">ITAL analysis report MB-4583-6596/05, FAO coffee project Annex C.10 · <a href=\"https://www.fao.org/fileadmin/user_upload/agns/pdf/coffee/Annex-C.10.pdf\">FAO PDF</a></p>\n</div>\n\n<div class=\"study\">\n<p><strong>Błaszkiewicz et al., 2023 – Storage conditions and quality parameters.</strong> Stored washed and natural green coffee at −10, 10 and 20 °C for a year and followed water activity, free fatty acids and volatile compounds. It proposes free fatty acids and volatile profiles as markers of ageing.</p>\n<p class=\"meta\">Scientific Reports 13, 6447 · <a href=\"https://doi.org/10.1038/s41598-023-33609-x\">doi:10.1038/s41598-023-33609-x</a></p>\n</div>"
}