{
  "id": "sample-roasters",
  "url": "https://coffearium.org/entries/sample-roasters/",
  "license": "CC-BY-4.0",
  "title": "Sample roasters",
  "summary": "Small roasters that turn green-coffee samples into cupping roasts under conditions kept as equal as possible, so the cup shows the coffee rather than the roast. Drum and hot-air designs; no standard fixes their size.",
  "domain": "roasting",
  "kind": "Equipment",
  "stage": "roast",
  "topics": [
    "equipment"
  ],
  "topicSections": {},
  "lang": "en",
  "status": "verified",
  "reviewer": "Coffearium verification pass",
  "lastVerified": "2026-11-16T00:00:00.000Z",
  "literatureSearched": "2026-11-16T00:00:00.000Z",
  "updated": "2026-11-16T00:00:00.000Z",
  "added": "2026-11-16T00:00:00.000Z",
  "brief": [
    "A sample roaster roasts small lots of green coffee for cupping and grading; ISO 6668 specifies a method for roasting green coffee for sensory analysis.<sup><a href=\"#src-s4\">4</a></sup>",
    "Specialty Coffee Association (SCA) Standard 102-2024 sets the cupping roast at ground-coffee L* 26–29, or Agtron “Gourmet” 63, and allows any technology that reaches it without roasting problems.<sup><a href=\"#src-s1\">1</a></sup>",
    "The superseded protocol of the SCA’s predecessor (SCAA) required 8–12 minutes per roast; SCA 102-2024 sets no time but rejects too-fast and too-slow roasts.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s3\">3</a></sup>",
    "Samples are air-cooled without water and rest 8–24 hours before cupping.<sup><a href=\"#src-s1\">1</a></sup>",
    "The Coffee Value Assessment asks for the same roaster, sample size, load temperature, power, cooling and resting time across samples, so the roast adds as little variation as possible.<sup><a href=\"#src-s2\">2</a></sup>"
  ],
  "quickFacts": [
    {
      "label": "Purpose",
      "value": "Roasting green-coffee samples for cupping, grading and comparison"
    },
    {
      "label": "Cupping roast (SCA 102-2024)",
      "value": "Ground coffee L* 26–29 (≈ tile"
    },
    {
      "label": "Roast time",
      "value": "Not set by SCA 102-2024; 8–12 min in the superseded SCAA protocol"
    },
    {
      "label": "Cooling and rest",
      "value": "Air-cooled, no water quench; rest 8–24 h"
    },
    {
      "label": "Designs in the sources",
      "value": "Drum (gas-fired); hot air; one electric sample roaster of unstated design"
    },
    {
      "label": "Batch size",
      "value": "No standard size; 200 g in one sample-drum study"
    }
  ],
  "aka": [
    "Sample roaster",
    "Laboratory roaster",
    "Lab roaster",
    "Sample coffee roaster"
  ],
  "linkTerms": [
    "sample roaster",
    "sample roasting",
    "sample roast",
    "laboratory roaster",
    "lab roaster"
  ],
  "related": [
    "cupping",
    "green-coffee-quality-control",
    "samples-in-the-trade",
    "roast-degree-and-colour",
    "roast-loss",
    "roast-defects",
    "drum-roaster",
    "fluid-bed-roaster",
    "tangential-and-centrifugal-roasters",
    "turning-point",
    "cooling-and-quenching",
    "degassing"
  ],
  "contested": [
    "Fixed roast time or a rate that suits the machine: the superseded SCAA protocol (revision of 2015) required every cupping roast to take 8–12 minutes<sup><a href=\"#src-s3\">3</a></sup>; SCA 102-2024 sets no time and judges “too fast” and “too slow” against the optimum rate of the specific roasting technology, and the CVA document states that no simple measurement controls these problems across technologies and coffee types.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s2\">2</a></sup>"
  ],
  "corrections": [
    {
      "date": "2026-11-16T00:00:00.000Z",
      "change": "Removed the source on a Swiss university laboratory's equipment list and the sentence resting on it; the patent is now introduced by its assignee alone; sources renumbered (Debona et al. from 12 to 11).",
      "reason": "Editor decision; the patent sentence had rested on that source to link the patent to a sample-roaster maker."
    },
    {
      "date": "2026-11-16T00:00:00.000Z",
      "change": "Campo-Ceballos and Gaviria-López 2023: roast times changed from 420–501 s to the drop times logged in Table 1, 410–517 s (text, chart, table, study card); charge temperature now given as 177.9–181.1 °C (Table 1) beside the 170 ± 1 °C of the methods; the mean colour of 65 is now set against Table 1's per-roast values of 75–95 and removed from the colour chart; both cooling times (180 s, 120 s) named.",
      "reason": "The paper is internally inconsistent (400–501 s and 420–501 s in the text; 403–517 s planned and 410–517 s logged in Table 1). The logged times are what the roasts took; turning-point.md already uses the Table 1 charge temperatures."
    },
    {
      "date": "2026-11-16T00:00:00.000Z",
      "change": "The Cenicafé roaster is no longer called a drum roaster (text, legend, charts, table, study card); the electric heat source is no longer shown under the drum in the figure legend.",
      "reason": "Gómez Parra et al. 2023 describe it only as an electric sample roaster."
    },
    {
      "date": "2026-11-16T00:00:00.000Z",
      "change": "The two roasters of Debona et al. 2022 are called small drum roasters, not shop drums, with their capacities; author list completed (13 authors).",
      "reason": "The paper does not call them shop roasters; three authors were missing."
    },
    {
      "date": "2026-11-16T00:00:00.000Z",
      "change": "The SCAA protocol is marked as superseded wherever its 8–12 min rule or targets appear (contested, reference table, deep-dive text, both charts).",
      "reason": "Editor requirement; the protocol was replaced by SCA 102–104-2024."
    },
    {
      "date": "2026-11-16T00:00:00.000Z",
      "change": "Three quotes corrected to the source wording (SCA 102-2024 “nonpermeable”; Anokye-Bempah et al. “(> 1 kg batch size)”; US 9,545,169 chaff-collector sentence ends without a full stop); the patent tierNote and text now say it describes a domestic roaster.",
      "reason": "Quotes must match the source word for word; the patent text speaks of a domestic roasting apparatus."
    }
  ],
  "sources": [
    {
      "id": "s1",
      "title": "SCA Standard 102-2024 Coffee Value Assessment: Sample Preparation and Tasting Mechanics",
      "authors": "Specialty Coffee Association",
      "year": 2024,
      "publisher": "Specialty Coffee Association",
      "url": "https://sca.coffee/s/AW_SCA-102_Sample-Preparation_281024_Secured.pdf",
      "tier": "A/B",
      "tierNote": "A for what the standard specifies; B for its explanations",
      "quote": "Different roasting technologies and roasting conditions may be used, as long as this purpose is accomplished.",
      "quotes": [
        {
          "text": "For the purposes of this standard, cupping level roast shall be defined in colorimetry terms as lightness of the ground coffee (L* in the CIELAB coordinates) of 26–29 (corresponding approximately to Agtron/SCA Roast Color Classification System tile #65).",
          "for": "cupping roast as L*"
        },
        {
          "text": "In roast-meter terms, cupping level roast shall be defined as a target reading of 63 in the Agtron “Gourmet” scale or its equivalent in other roast meters.",
          "for": "roast-meter target"
        },
        {
          "text": "Alternative methods for roast level control, such as dry matter loss, or volume increase of the coffee bean, may be used if correlations with colorimetry or spectrometry have been established.",
          "for": "alternatives to colour"
        },
        {
          "text": "When using roast meters, parameters such as the grind level and the coffee temperature should be controlled.",
          "for": "meter conditions"
        },
        {
          "text": "Roast batches that do not fall in the desired roast level range or that present underdeveloped, burnt, or baked characteristics should not be used for cupping, and the roast batch should be repeated.",
          "for": "repeat failed batches"
        },
        {
          "text": "The coffee sample shall be immediately air-cooled (without water quenching).",
          "for": "cooling"
        },
        {
          "text": "Coffee should rest for 8 to 24 hours after roasting.",
          "for": "rest"
        },
        {
          "text": "All roasting parameters should remain as constant as possible from sample to sample.",
          "for": "constant parameters"
        },
        {
          "text": "The roast level for specialty coffee cupping should be what has mostly been described as “medium.”",
          "for": "medium roast"
        },
        {
          "text": "The roast level should be controlled through colorimetry (e.g., CIELAB or Agtron/SCA Roast Color Classification System), or through infrared spectrometry (e.g., Agtron device).",
          "for": "colour methods"
        },
        {
          "text": "It should be considered that samples with a lot of chaff will show a larger error.",
          "for": "chaff and meter readings"
        },
        {
          "text": "When they reach room temperature (approximately 20°C), completed samples should then be stored in airtight containers or nonpermeable bags until cupping.",
          "for": "storage"
        },
        {
          "text": "Samples should be stored in a cool, dark place.",
          "for": "cool, dark storage"
        }
      ],
      "scope": {
        "claim": "guidance",
        "context": "SCA standard for sample preparation in the Coffee Value Assessment, 2024; section 5.1 Roasting (roast level, roasting problems, consistency, cooling, storage, rest).",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s2",
      "title": "A System to Assess Coffee Value: Understanding the Specialty Coffee Association’s Coffee Value Assessment (June 2024)",
      "authors": "Specialty Coffee Association (writing team Fernández-Alduenda, M.; Ionescu, K. E.; Giuliano, P.; Rugolo, J.; Delrue, R.)",
      "year": 2024,
      "publisher": "Specialty Coffee Association",
      "url": "https://static1.squarespace.com/static/584f6bbef5e23149e5522201/t/667182ffdde8a5081afc2d8c/1718715138872/SCA+-+A+System+to+Asssess+Coffee+Value+-+June+2024+(Secured).pdf",
      "tier": "A/B",
      "tierNote": "A for what the CVA itself specifies (procedure, roast-meter targets in Table 4); B for its explanations, such as the descriptions of too-fast and too-slow roasting",
      "quote": "In other words, sample roasting is not about “bringing out the best possible flavor” of each coffee,",
      "quotes": [
        {
          "text": "For that reason, all controllable conditions and parameters—such as roaster unit, sample size, load temperature, power, final roast level, cooling time, and resting time—should be kept as constant as possible across samples, especially when they will be tasted in the same session.",
          "for": "conditions kept constant"
        },
        {
          "text": "It is not advisable to shift the power during each roast, as we cannot guarantee all samples will receive an equivalent treatment.",
          "for": "constant power"
        },
        {
          "text": "If the variation among samples in terms of bean density or moisture content is too great to have good results with a single set of conditions, it is advisable to categorize the samples in two or three groups and use the same roasting conditions within each group.",
          "for": "grouping samples"
        },
        {
          "text": "In some situations, especially when the amount of coffee required for cupping is larger than the roaster's capacity, it may be necessary to roast several small batches and combine them.",
          "for": "combining batches"
        },
        {
          "text": "Unfortunately, to the best of our knowledge, there are no simple measurements to control for these problems across different roasting technologies and coffee types.",
          "for": "no simple test for too fast or too slow"
        },
        {
          "text": "However, cuppers may be trained to detect these problems by assessing the beans' structure, gradient of colors, and flavor.",
          "for": "detection by cuppers"
        },
        {
          "text": "“Too slow” roasting will result in the so-called “baked” bean, where the structure of the bean becomes brittle and the overall flavor and aroma intensity becomes subdued, often with “grain” notes.",
          "for": "baked roast"
        },
        {
          "text": "However, the scales used by the different roast meters are arbitrary, and even if the same scale is used, sometimes different brands will not completely correlate.",
          "for": "meter scales"
        },
        {
          "text": "Table 4 lists the target reading for cupping roast level using different brands of roast meters.",
          "for": "four meter targets"
        },
        {
          "text": "The SCA is working to research the correlations among those parameters, and more accurate guidelines will be available in the future.",
          "for": "SCA research on correlations"
        },
        {
          "text": "Small changes in roasting parameters may have a dramatic effect on coffee flavor.",
          "for": "small changes, large effect"
        },
        {
          "text": "“Too fast” roasting implies the center of the bean will not have enough time to develop compared to the surface of the bean.",
          "for": "too fast"
        },
        {
          "text": "In situations where both descriptive and affective assessments will be done separately on the same sample, the coffee used for both assessments should come from either the same roasting batch or the same combination of multiple batches, so that the roast for both assessments remains the same.",
          "for": "same batch for both assessments"
        },
        {
          "text": "As cupping is a technique designed to assess green coffee lots, green coffee needs to be roasted, ground, and brewed (sample preparation) in order to taste it.",
          "for": "green coffee must be roasted to be tasted"
        }
      ],
      "scope": {
        "claim": "guidance",
        "context": "SCA explanatory document for the Coffee Value Assessment, June 2024; sample-roasting section and Table 4 (roast-meter targets).",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s3",
      "title": "SCAA Protocols: Cupping Specialty Coffee",
      "authors": "Specialty Coffee Association of America",
      "year": 2015,
      "publisher": "Specialty Coffee Association of America (revision of 16 December 2015)",
      "url": "https://www.scaa.org/PDF/resources/cupping-protocols.pdf",
      "tier": "A/B",
      "tierNote": "A for what the protocol specified (roast time, roast-meter targets and tolerance, cooling, rest); B for its explanations. The protocol was superseded by SCA 102-2024, 103-2024 and 104-2024.",
      "quote": "The roast should be completed in no less than 8 minutes and no more than 12 minutes.",
      "quotes": [
        {
          "text": "The sample should be roasted within 24 hours of cupping and allowed to rest for at least 8 hours.",
          "for": "roast within 24 h, rest at least 8 h"
        },
        {
          "text": "The coffee shall meet the following measurements with a tolerance of ± 1.0 units:",
          "for": "tolerance of the meter targets"
        },
        {
          "text": "Scorching or tipping should not be apparent.",
          "for": "scorching and tipping"
        },
        {
          "text": "The roast level for cupping shall be measured between 30 minutes and 4 hours after roasting using coffee ground to the SCAA Standard Grind for Cupping",
          "for": "when and how colour was measured"
        }
      ],
      "scope": {
        "claim": "guidance",
        "context": "SCAA cupping protocol, revision of 16 December 2015 (superseded in 2024); sample-preparation section on roasting.",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s4",
      "title": "ISO 6668:2008 Green coffee — Preparation of samples for use in sensory analysis",
      "authors": "International Organization for Standardization (ISO/TC 34/SC 15)",
      "year": 2008,
      "publisher": "ISO",
      "url": "https://www.iso.org/standard/44609.html",
      "tier": "A",
      "tierNote": "ISO catalogue page; A for the standard's title, scope and status only (full text not openly available). Edition 2, June 2008; last reviewed and confirmed in 2017.",
      "quote": "Generally, the sample will require a light roast for assessment of defects, and a medium roast for assessment of flavour and colour.",
      "quotes": [
        {
          "text": "specifies a method for the roasting of green coffee, grinding the roasted coffee, and the preparation",
          "for": "scope of ISO 6668"
        },
        {
          "text": "The sensory analysis carried out following this preparation may be used to determine the acceptance or rejection of a shipment of coffee, subject to agreement between the parties concerned.",
          "for": "acceptance or rejection"
        },
        {
          "text": "but also for purposes of comparative assessment of different samples, in which case an identical procedure can be followed for each of the samples.",
          "for": "comparison of samples"
        }
      ],
      "scope": {
        "claim": "description",
        "context": "ISO catalogue abstract of ISO 6668:2008.",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s5",
      "title": "The Coffee Exporter's Guide, Third Edition",
      "authors": "International Trade Centre (ITC)",
      "year": 2011,
      "publisher": "International Trade Centre (UNCTAD/WTO), Geneva",
      "url": "https://bootcoffee.com/wp-content/uploads/2014/10/Coffee-Exporters-Guide-2012.pdf",
      "tier": "A",
      "tierNote": "Copy of the ITC guide hosted by a coffee company; the International Trade Centre is a joint agency of the UN and the WTO, so A as a publication of an international organisation (editor decision of 10 Nov 2026, delegated by the owner). Chapter 12, Coffee tasting (liquoring), The roast (p. 220). Carries no number in this entry.",
      "quote": "A light roast also makes it easier to spot immature and green beans, which tend to show up as yellowish pale in colour rather than brown when roasted.",
      "quotes": [
        {
          "text": "Uneven bean size produces uneven roasts because small, broken and light beans roast faster than whole and solid beans.",
          "for": "uneven bean size"
        },
        {
          "text": "From the professional taster's point of view, it is easier to detect quality and any off-flavours when coffee is roasted lighter rather than darker.",
          "for": "lighter roasts for detection"
        },
        {
          "text": "Fine roast. Bright, brilliant, uniform and even, no pales.",
          "for": "roast appearance grades"
        }
      ],
      "scope": {
        "claim": "guidance",
        "context": "Trade guide for exporters in producing countries, 2011; liquoring section on the roast.",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s6",
      "title": "Optimising consumer acceptability of Cauca specialty coffee through roasting profiles on acidity and body sensory attributes",
      "authors": "Campo-Ceballos, D. A.; Gaviria-López, C. A.",
      "year": 2023,
      "publisher": "Czech Journal of Food Sciences 41(1), 64–72",
      "url": "https://cjfs.agriculturejournals.cz/pdfs/cjf/2023/01/08.pdf",
      "doi": "10.17221/181/2022-CJFS",
      "tier": "A",
      "quote": "Green coffee bean batches of 200 g were roasted in a gas-driven Sample Roaster (PROBAT AG, Germany),",
      "quotes": [
        {
          "text": "The 13 roasting profiles ranged from 177 to 195 °C and 420 to 501 s, respectively,",
          "for": "times as given in the design section (not used; Table 1 used)"
        },
        {
          "text": "Experimental samples come from 13 different combinations of time and temperature in the range of 175–195 °C and between 400 and 501 s (see Table 1).",
          "for": "times as given in the roasting section (not used; Table 1 used)"
        },
        {
          "text": "This process was standard for all samples and took an average of 180 s.",
          "for": "fan cooling 180 s in the methods"
        },
        {
          "text": "The average colour of roasted coffee beans was 65 on the Agtron SCA scale, measured with the QUANTIK IR-800 colourimeter.",
          "for": "mean colour 65 as stated in the text (Table 1 lists 75–95)"
        },
        {
          "text": "After each roasting process, a fan rapidly cooled the roasted coffee beans to room temperature.",
          "for": "fan cooling"
        },
        {
          "text": "The charge temperature was 170 ±1 °C, considering the density and size of the bean's variety.",
          "for": "charge temperature as stated in the methods (Table 1 logs 177.9–181.1 °C)"
        },
        {
          "text": "the coffee drops the roasting drum to be cooled to room temperature for 120 s",
          "for": "beans drop from the drum (cooling given as 120 s here, 180 s in the methods)"
        },
        {
          "text": "with a precision of ±1 °C equipped with a time-temperature data logging and a control system",
          "for": "logging"
        }
      ],
      "scope": {
        "claim": "data",
        "context": "One Cauca (Colombia) coffee, 13 roasts of 200 g, gas sample drum, central composite design. Text gives 400–501 s and 420–501 s; Table 1 logs drop times of 410–517 s (used here). Cooling 180 s (methods) or 120 s (results).",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s7",
      "title": "Determinación de compuestos químicos del café tostado por Espectroscopia de Infrarrojo Cercano (NIRS)",
      "authors": "Gómez Parra, C. R.; Gallego Agudelo, C. P.; Echeverri Giraldo, L. F.; Pabón Usaquén, J.; Ortiz, A.; Osorio Pérez, V.",
      "year": 2023,
      "publisher": "Revista Cenicafé 74(1), e74104",
      "url": "https://www.cenicafe.org/es/publications/Articulo_Determinacio.pdf",
      "doi": "10.38141/10778/74104",
      "tier": "A",
      "quote": "Las muestras de café almendra verde se procesaron en una tostadora Probat BRZ2 eléctrica de muestras, con una temperatura inicial de 200°C.",
      "quotes": [
        {
          "text": "La duración se definió por el color requerido, según la referencia de la escala Agtron/SCA, en un rango de tiempo entre 8-12 minutos, que permitió establecer los tres grados de tueste definidos para la investigación, sin que las muestras presentaran defectos por el tueste.",
          "for": "8–12 min to the required colour"
        },
        {
          "text": "Durante el proceso, se le realizó una comparación visual de las muestras de café con un patrón de color obtenido de la paleta de colores (Carta Agtron/SCA), que es un patrón de desarrollo de la tostación que se basa en la caramelización del azúcar.",
          "for": "colour checked by eye during the roast"
        },
        {
          "text": "85 Agtron (Claro), 55 Agtron (medio) y 35 Agtron (oscuro),",
          "for": "three roast degrees"
        }
      ],
      "scope": {
        "claim": "data",
        "context": "100 Colombian green-coffee samples, each roasted to three degrees on an electric sample roaster at Cenicafé, for near-infrared calibration.",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s8",
      "title": "The effect of roast profiles on the dynamics of titratable acidity during coffee roasting",
      "authors": "Anokye-Bempah, L.; Styczynski, T.; de Andrade Teixeira Fernandes, N.; Gervay-Hague, J.; Ristenpart, W. D.; Donis-González, I. R.",
      "year": 2024,
      "publisher": "Scientific Reports 14, 8237",
      "url": "https://pmc.ncbi.nlm.nih.gov/articles/PMC11002029/",
      "doi": "10.1038/s41598-024-57256-y",
      "tier": "A",
      "quote": "In particular, most prior studies used isothermal roasting in small-scale roasters with batch sizes ranging from 50 to 250 g, which facilitate isothermal conditions but do not necessarily reflect larger commercial-scale roasting conditions, where the temperature versus time (i.e., the ‘roast profile’) is a crucial control parameter.",
      "quotes": [
        {
          "text": "Thus, the effects of various dynamic aspects of commercial scale roasting (> 1 kg batch size), including pre-heating, continuous temperature increase, or reduced final temperatures on TA have not been examined.",
          "for": "commercial scale above 1 kg"
        }
      ],
      "scope": {
        "claim": "cited",
        "context": "The authors' summary of earlier titratable-acidity studies, in the introduction to a study on a 5 kg gas drum roaster loaded with 4 kg.",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s9",
      "title": "Investigations on the Hot Air Roasting of Coffee Beans (Diss. ETH No. 13620)",
      "authors": "Schenker, S.",
      "year": 2000,
      "publisher": "ETH Zürich (doctoral thesis)",
      "url": "https://library.sweetmarias.com/wp-content/uploads/2020/08/roasting_hot_air_doctorate.pdf",
      "tier": "B",
      "quote": "Roasting experiments were carried out with a fluidized-bed hot air laboratory roaster in batches of 100 g green beans.",
      "quotes": [
        {
          "text": "Hot air temperature was measured by a PT100 temperature probe right before the roasting chamber",
          "for": "air probe before the chamber"
        },
        {
          "text": "Fluidized-bed roasting and cooling were performed in separate sections.",
          "for": "separate cooler"
        },
        {
          "text": "The air was heated to roasting temperatures by two parallel electrical heaters",
          "for": "electric heaters"
        }
      ],
      "scope": {
        "claim": "description",
        "context": "Description of the laboratory fluid-bed roaster used for the thesis experiments, ETH Zürich, 2000.",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s10",
      "title": "Apparatus for roasting coffee beans (US Patent 9,545,169 B2)",
      "authors": "Stordy, A.; Frieling, R. (assignee IKAWA Ltd)",
      "year": 2017,
      "publisher": "United States Patent and Trademark Office",
      "url": "https://patentimages.storage.googleapis.com/86/bf/8e/c2b5233e5ade99/US9545169.pdf",
      "tier": "A/B",
      "tierNote": "A for how the machine is built; B otherwise; never for performance. The patent describes a domestic roaster and does not mention sample roasting.",
      "quote": "hot air is injected tangentially to the circumference of the roasting chamber by the air driving means",
      "quotes": [
        {
          "text": "at least a portion of said chamber is generally conical and expands in diameter towards said outlet",
          "for": "conical chamber"
        },
        {
          "text": "a heater 15 (such as an electrical filament) for heating air",
          "for": "electric heater"
        },
        {
          "text": "A chaff collector 52 is located immediately below the cyclonic separator outlet 50",
          "for": "cyclone and chaff collector"
        },
        {
          "text": "circulate generally horizontally about the periphery of the chamber when the air driving means drives heated air",
          "for": "beans circulate around the periphery"
        },
        {
          "text": "the air driving means may be configured to drive cooler air into the chamber to quench the roasted beans",
          "for": "cooling with cooler air"
        }
      ],
      "scope": {
        "claim": "description",
        "context": "US patent granted 17 January 2017 (PCT filed 1 November 2011); construction of a small hot-air roaster.",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    },
    {
      "id": "s11",
      "title": "Heat and Mass Transfer Kinetics on the Chemical and Sensory Quality of Arabica Coffee Beans",
      "authors": "Debona, D. G.; Louvem, R. F.; da Luz, J. M. R.; Nariyoshi, Y. N.; de Castro, E. V. R.; Oliveira, E. C. S.; Guarçoni, R. C.; de Castro, M. G.; de Oliveira, G. F.; Partelli, F. L.; Soares da Silva, M. C.; Bellon, A. P.; Pereira, L. L.",
      "year": 2022,
      "publisher": "Agronomy 12(11), 2880",
      "url": "https://www.mdpi.com/2073-4395/12/11/2880",
      "doi": "10.3390/agronomy12112880",
      "tier": "A",
      "quote": "the roasters did not present significant differences in the average of the final sensory notes",
      "quotes": [
        {
          "text": "There are specific regions in the infrared spectrum that can be used as markers to discriminate the roasting profiles",
          "for": "spectra and profiles"
        },
        {
          "text": "The intervals that most contributed to a separation trend between Golden Plus and Probatino roasters were IV and XII",
          "for": "separation trend between roasters"
        },
        {
          "text": "in batches of 1.2 or 2.0 kg samples",
          "for": "batch sizes"
        },
        {
          "text": "The sensory evaluation was carried out 24 h after roasting of the coffee beans by the cupping test with 5 Q-graders",
          "for": "sensory panel"
        }
      ],
      "scope": {
        "claim": "finding",
        "context": "Two small LPG-heated drum roasters (capacity 0.8–1.2 kg and 2.0 kg; batches 1.2 or 2.0 kg), four profiles of one arabica from Espírito Santo, Brazil; five Q graders, 24 h after roasting. Neither called a sample roaster. Tables 1–2 (PDF).",
        "checked": "2026-11-16T00:00:00.000Z"
      },
      "accessed": "2026-11-16T00:00:00.000Z"
    }
  ],
  "markdown": "## What a sample roaster is for\n\nGreen coffee cannot be tasted as it is. A buyer or a grader has to roast it, grind it and brew it first.<sup><a href=\"#src-s2\">2</a></sup> A sample roaster does the first step on a small scale. It turns a sample of a lot into a roast that can be cupped. A lot is a batch of coffee from one origin and process, traded as a unit.\n\nISO 6668 specifies a method for roasting green coffee, grinding it and preparing a brew for sensory analysis.<sup><a href=\"#src-s4\">4</a></sup> Its result may decide whether a shipment is accepted, if the parties agree.<sup><a href=\"#src-s4\">4</a></sup> The same procedure, repeated identically, also serves to compare several samples.<sup><a href=\"#src-s4\">4</a></sup>\n\nThe aim differs from production roasting. According to the Specialty Coffee Association (SCA), sample roasting is not about bringing out the best flavour of each coffee.<sup><a href=\"#src-s2\">2</a></sup> It should show the green coffee as it is. Differences in the cup should come from the coffees, not from the roast.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s2\">2</a></sup>\n\n## Designs and heat sources\n\nNo standard prescribes a design. SCA 102-2024 allows different roasting technologies and conditions, as long as the target roast is reached without roasting problems.<sup><a href=\"#src-s1\">1</a></sup> The sources consulted for this entry describe two families.\n\n**Drum sample roasters.** A small drum turns over a heat source. One 2023 study roasted 200 g batches in a gas-fired drum sample roaster; the beans dropped from the drum and a fan cooled them.<sup><a href=\"#src-s6\">6</a></sup> Another 2023 study, at Colombia’s national coffee research centre, used an electric sample roaster; the paper does not describe its design.<sup><a href=\"#src-s7\">7</a></sup> How a drum moves and heats beans is explained in Drum roaster.\n\n**Hot-air sample roasters.** Here a stream of hot air moves and heats the beans. A 2000 doctoral thesis describes a laboratory fluid-bed roaster with electric heaters and a probe just before the chamber.<sup><a href=\"#src-s9\">9</a></sup> Roasting and cooling took place in separate sections.<sup><a href=\"#src-s9\">9</a></sup> The physics is set out in Fluid-bed roasters.\n\nA 2017 US patent, assigned to IKAWA Ltd, describes a small hot-air roaster.<sup><a href=\"#src-s10\">10</a></sup> An electric filament heats the air, and a fan blows it tangentially into a chamber that widens towards its outlet.<sup><a href=\"#src-s10\">10</a></sup> The beans circulate around the chamber wall.<sup><a href=\"#src-s10\">10</a></sup> A cyclone separates the chaff into a collector, and cooler air cools the beans at the end.<sup><a href=\"#src-s10\">10</a></sup> The patent describes a domestic roaster and does not mention sample roasting.<sup><a href=\"#src-s10\">10</a></sup> No source consulted for this entry links its design to a particular sample roaster.\n\n<figure class=\"iso-fig\">\n<div data-figure=\"sample-roasters-designs\"></div>\n<ol class=\"fig-legend\">\n<li data-n=\"1\"><span><b>Drum.</b> A small turning drum holds the batch; one study used 200 g.<sup><a href=\"#src-s6\">6</a></sup></span></li>\n<li data-n=\"2\"><span><b>Heat under the drum.</b> Gas in one study.<sup><a href=\"#src-s6\">6</a></sup></span></li>\n<li data-n=\"3\"><span><b>Probe and logger.</b> Time and temperature are logged during the roast.<sup><a href=\"#src-s6\">6</a></sup></span></li>\n<li data-n=\"4\"><span><b>Colour check.</b> In a second study, on an electric sample roaster, beans were compared by eye with a colour chart during the roast.<sup><a href=\"#src-s7\">7</a></sup></span></li>\n<li data-n=\"5\"><span><b>Cooling by fan.</b> The beans drop from the drum and are cooled with air.<sup><a href=\"#src-s6\">6</a></sup></span></li>\n<li data-n=\"6\"><span><b>Fan and electric heater.</b> Air is driven by a fan and heated by an electric filament.<sup><a href=\"#src-s10\">10</a></sup></span></li>\n<li data-n=\"7\"><span><b>Tangential inlet.</b> Hot air enters along the chamber wall.<sup><a href=\"#src-s10\">10</a></sup></span></li>\n<li data-n=\"8\"><span><b>Conical chamber.</b> It widens towards the outlet; the beans circulate around its periphery.<sup><a href=\"#src-s10\">10</a></sup></span></li>\n<li data-n=\"9\"><span><b>Cyclone and chaff collector.</b> The collector sits just below the cyclone outlet.<sup><a href=\"#src-s10\">10</a></sup></span></li>\n<li data-n=\"10\"><span><b>Cooling air.</b> After the roast, cooler air is blown through the beans.<sup><a href=\"#src-s10\">10</a></sup></span></li>\n</ol>\n<figcaption>Two designs: a drum sample roaster as described in a 2023 study, with the colour check of a second 2023 study (left), and the hot-air roaster of a 2017 patent (right). Schematic, not to scale.<sup><a href=\"#src-s6\">6</a>,<a href=\"#src-s7\">7</a>,<a href=\"#src-s10\">10</a></sup></figcaption>\n</figure>\n\nNo source consulted for this entry describes an infrared sample roaster, so none is described here.\n\n## How a sample roast is run\n\nSCA 102-2024 sets the rules for cupping roasts in the Coffee Value Assessment (CVA). The target is a “medium” roast.<sup><a href=\"#src-s1\">1</a></sup> In colour terms this is a ground-coffee lightness (L*) of 26–29, close to tile #65 of the Agtron/SCA colour discs.<sup><a href=\"#src-s1\">1</a></sup> On a roast meter, the target is 63 on the Agtron “Gourmet” scale or its equivalent.<sup><a href=\"#src-s1\">1</a></sup>\n\nThe standard sets no roast time and no batch size. Instead it asks that roasts avoid “roasting problems”: too fast, too slow, underdeveloped or burnt.<sup><a href=\"#src-s1\">1</a></sup> A batch outside the target range, or with such faults, is not cupped. It is roasted again.<sup><a href=\"#src-s1\">1</a></sup>\n\nAfter the roast, the steps are fixed:\n\n1. Cool the sample at once with air, without water.<sup><a href=\"#src-s1\">1</a></sup>\n2. At room temperature (about 20 °C), store it in an airtight container or a non-permeable bag, in a cool, dark place.<sup><a href=\"#src-s1\">1</a></sup>\n3. Let it rest 8–24 hours before cupping.<sup><a href=\"#src-s1\">1</a></sup>\n\nThe full cupping protocol that follows is in Cupping.\n\n**Keeping conditions equal.** The CVA document asks for the same roaster, sample size, load temperature, power, final roast level, cooling time and resting time across samples.<sup><a href=\"#src-s2\">2</a></sup> It advises against changing the power during a roast.<sup><a href=\"#src-s2\">2</a></sup> If samples differ too much in density or moisture, they can be sorted into two or three groups, each roasted under its own conditions.<sup><a href=\"#src-s2\">2</a></sup> If the roaster is too small for the coffee needed, several small batches may be roasted and combined.<sup><a href=\"#src-s2\">2</a></sup>\n\n## Checking the roast\n\n**Colour.** SCA 102-2024 names colorimetry, such as CIELAB or the Agtron/SCA discs, and infrared spectrometry, such as an Agtron device.<sup><a href=\"#src-s1\">1</a></sup> When a roast meter is used, grind level and coffee temperature should be controlled.<sup><a href=\"#src-s1\">1</a></sup> Samples with much chaff give less reliable readings.<sup><a href=\"#src-s1\">1</a></sup> Meter scales are arbitrary, and different brands do not always agree even on the same scale.<sup><a href=\"#src-s2\">2</a></sup> Colour scales are covered in Roast degree and colour.\n\n**Roast loss and volume.** Dry-matter loss or bean volume increase may replace colour, once their relation to colour or spectrometry is established.<sup><a href=\"#src-s1\">1</a></sup> Roast loss is explained in its own entry.\n\n**Eye and cup.** The CVA document knows no simple measurement that detects too-fast or too-slow roasts across technologies.<sup><a href=\"#src-s2\">2</a></sup> Cuppers can be trained to find them from bean structure, colour gradient and flavour.<sup><a href=\"#src-s2\">2</a></sup> The International Trade Centre’s guide adds that a light roast shows immature beans as yellowish pale rather than brown.<sup><a href=\"#src-s5\">5</a></sup> Such pale beans, called quakers, are covered in Roast defects.\n\n<!-- deep-dive -->\n\n## Reference values\n\nValues specified by standards, then values reported for particular machines. Study values are not targets.\n\n| Parameter | Value | Source |\n|---|---|---|\n| Cupping roast, colour | Ground coffee L* 26–29 (≈ Agtron/SCA tile #65) | SCA 102-2024<sup><a href=\"#src-s1\">1</a></sup> |\n| Cupping roast, roast meter | Agtron “Gourmet” 63; Agtron “Commercial” 48; Probat Colorette 3b 96; Colortrack 62 | SCA 102-2024; CVA document<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s2\">2</a></sup> |\n| Same targets, superseded SCAA protocol | Same four readings, tolerance ± 1.0 units (Agtron “Gourmet” 62–64); measured on ground coffee at room temperature, 30 min–4 h after roasting | SCAA protocol, rev. 2015<sup><a href=\"#src-s3\">3</a></sup> |\n| Roast time | Not set (2024); 8–12 min (superseded SCAA protocol, rev. 2015) | SCA 102-2024; SCAA protocol<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s3\">3</a></sup> |\n| Roasting technology | Any, if the target is reached without roasting problems | SCA 102-2024<sup><a href=\"#src-s1\">1</a></sup> |\n| Alternative roast-level control | Dry-matter loss or bean volume increase, once correlated with colour or spectrometry | SCA 102-2024<sup><a href=\"#src-s1\">1</a></sup> |\n| Cooling | Immediately, with air; no water quench | SCA 102-2024<sup><a href=\"#src-s1\">1</a></sup> |\n| Storage | Airtight container or non-permeable bag from ≈20 °C; cool, dark place | SCA 102-2024<sup><a href=\"#src-s1\">1</a></sup> |\n| Rest before cupping | 8–24 h (2024); roasted within 24 h of cupping, rest at least 8 h (superseded SCAA protocol) | SCA 102-2024; SCAA protocol<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s3\">3</a></sup> |\n| Held constant across samples | Roaster unit, sample size, load temperature, power, final roast level, cooling time, resting time | CVA document<sup><a href=\"#src-s2\">2</a></sup> |\n| Samples too different | Sort into 2 or 3 groups, same conditions within each group | CVA document<sup><a href=\"#src-s2\">2</a></sup> |\n| Roast degree by purpose | Light for defects; medium for flavour and colour | ISO 6668 (catalogue abstract)<sup><a href=\"#src-s4\">4</a></sup> |\n| Gas drum sample roaster, one study | 200 g batches; charge 177.9–181.1 °C per roast in Table 1 (the methods state 170 ± 1 °C); drop times 410–517 s in Table 1 (the text states 400–501 s and 420–501 s); colour a mean of 65 on the Agtron SCA scale in the text, 75–95 “Colour (SCA)” per roast in Table 1; fan cooling, 180 s on average in the methods and 120 s in the results | Campo-Ceballos & Gaviria-López<sup><a href=\"#src-s6\">6</a></sup> |\n| Electric sample roaster, one study | Initial temperature 200 °C; 8–12 min to the required colour; colour checked by eye against the Agtron/SCA chart; 85, 55 and 35 on that scale | Gómez Parra et al.<sup><a href=\"#src-s7\">7</a></sup> |\n| Earlier studies of titratable acidity (as summarised in a 2024 paper) | Mostly isothermal roasting in small-scale roasters, 50–250 g batches | Anokye-Bempah et al.<sup><a href=\"#src-s8\">8</a></sup> |\n\n## From fixed time to fixed outcome\n\nThe SCAA protocol, last revised in December 2015 and superseded by SCA 102-2024, required every cupping roast to take 8–12 minutes.<sup><a href=\"#src-s3\">3</a></sup> It also asked that scorching or tipping should not be visible.<sup><a href=\"#src-s3\">3</a></sup> Its roast-meter targets carried a tolerance of ± 1.0 units.<sup><a href=\"#src-s3\">3</a></sup>\n\nSCA 102-2024 dropped the time window. It defines roasting problems relative to the “optimum” rate of a given roasting technology instead.<sup><a href=\"#src-s1\">1</a></sup> According to the CVA document, a roast that is too fast leaves the centre of the bean behind the surface, and a roast that is too slow gives a “baked” bean with a brittle structure, subdued flavour and often grain-like notes.<sup><a href=\"#src-s2\">2</a></sup> The two documents therefore disagree on whether one time window fits all machines (see Contested).\n\n<figure>\n<div data-figure=\"sample-roasters-roast-times\"></div>\n<figcaption>Roast time required by the superseded SCAA protocol (rev. 2015) and times reported for sample and other small drum roasters; SCA 102-2024 sets no time. Gas sample drum: logged drop times of Table 1 of the paper. Light to dark profiles only for the two small drums; their baked profiles (20.00 and 25.67 min) are left out.<sup><a href=\"#src-s3\">3</a>,<a href=\"#src-s6\">6</a>,<a href=\"#src-s7\">7</a>,<a href=\"#src-s11\">11</a></sup></figcaption>\n</figure>\n\nReported times sit inside or near the old window. A study at Colombia’s national coffee research centre (Cenicafé) roasted 100 coffees to three degrees each on an electric sample roaster. Each roast took 8–12 minutes, timed by the colour needed.<sup><a href=\"#src-s7\">7</a></sup> In 13 roasts of 200 g on a gas sample drum, the logged drop times were 410–517 s (about 6.8–8.6 min).<sup><a href=\"#src-s6\">6</a></sup> The paper’s text gives 400–501 s in one place and 420–501 s in another; this entry uses the times logged in its Table 1, because they are what the roasts took.<sup><a href=\"#src-s6\">6</a></sup> Two small drum roasters heated with liquefied petroleum gas (LPG), with capacities of 0.8–1.2 kg and 2.0 kg, needed different times for the same named profiles: 8.67 and 12.98 min for “light”, 11.25 and 17.75 min for “dark”.<sup><a href=\"#src-s11\">11</a></sup> Time to a given degree thus belongs to the machine.\n\n## Roast degree for cupping and for research\n\nThe cupping target is one point on the colour scale: L* 26–29 on ground coffee, or 63 on the Agtron “Gourmet” meter scale.<sup><a href=\"#src-s1\">1</a></sup> ISO 6668, according to its catalogue abstract, generally asks for a light roast to assess defects and a medium roast for flavour and colour.<sup><a href=\"#src-s4\">4</a></sup> The trade guide gives the reason: lighter roasts make quality and off-flavours easier to detect, and they show immature beans.<sup><a href=\"#src-s5\">5</a></sup>\n\nResearch uses the same machines for other purposes. The Cenicafé study roasted each of 100 coffees to three degrees, 85, 55 and 35 on the Agtron/SCA chart, judged by eye.<sup><a href=\"#src-s7\">7</a></sup> The 200 g gas-drum study reports a mean of 65 on the Agtron SCA scale, measured with a colour meter.<sup><a href=\"#src-s6\">6</a></sup> Its Table 1, however, lists per-roast values of 75–95 in a column headed “Colour (SCA)”, so the roast degree of that study is unclear and it is not shown in the figure below.<sup><a href=\"#src-s6\">6</a></sup>\n\n<figure>\n<div data-figure=\"sample-roasters-colour-targets\"></div>\n<figcaption>The SCA cupping target on the Agtron “Gourmet” meter scale, the tolerance of the superseded SCAA protocol, and the three roast degrees of one sample-roaster study. Disc numbers judged by eye and meter readings are close but not identical scales; the axis is approximate and not a conversion.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s3\">3</a>,<a href=\"#src-s6\">6</a>,<a href=\"#src-s7\">7</a></sup></figcaption>\n</figure>\n\n## Sample roasts and production roasts\n\nSample roasts and production roasts differ in scale and in control. A 2024 paper notes that most earlier studies on titratable acidity used small-scale roasters with 50–250 g batches at constant temperature.<sup><a href=\"#src-s8\">8</a></sup> Its authors state that such roasts do not necessarily reflect commercial-scale roasting, where the temperature curve over time is the key control.<sup><a href=\"#src-s8\">8</a></sup> They name batches above 1 kg as commercial scale.<sup><a href=\"#src-s8\">8</a></sup>\n\nThe purposes differ too. A production roast is developed for the flavour a roaster wants to sell. A cupping roast keeps conditions equal across samples on purpose.<sup><a href=\"#src-s2\">2</a></sup> A coffee may therefore taste different in a sample roast than in a production profile (our reading of the two aims).\n\nDirect evidence is thin. In a 2022 study, two small drum roasters gave cupping scores that did not differ significantly. Infrared spectra still showed a separation trend between the two roasters.<sup><a href=\"#src-s11\">11</a></sup> Neither machine was described as a sample roaster.<sup><a href=\"#src-s11\">11</a></sup> No study consulted for this entry compared cupping scores from a sample roaster with scores from a production roaster for the same lots.\n\n## Risks and defects\n\n- **Roasting problems.** Too-fast, too-slow, underdeveloped or burnt batches add “noise” to the test; the standard says to repeat them.<sup><a href=\"#src-s1\">1</a>,<a href=\"#src-s2\">2</a></sup> Their appearance and causes are described in Roast defects.\n- **Changing settings between samples.** Small changes in roasting parameters may have a large effect on flavour, according to the CVA document; it advises constant power.<sup><a href=\"#src-s2\">2</a></sup>\n- **Uneven samples.** Small, broken and light beans roast faster than whole and solid beans, so uneven bean size gives uneven roasts.<sup><a href=\"#src-s5\">5</a></sup>\n- **Water quenching.** It is not allowed for cupping samples.<sup><a href=\"#src-s1\">1</a></sup> Its effects on beans are covered in Cooling and quenching.\n- **Colour readings.** Chaff, grind level and coffee temperature affect roast-meter readings.<sup><a href=\"#src-s1\">1</a></sup> Meters of different brands do not always correlate.<sup><a href=\"#src-s2\">2</a></sup>\n- **Mixed batches.** When several small batches are combined, the descriptive and the affective assessments should use the same batch or the same combination.<sup><a href=\"#src-s2\">2</a></sup>\n\n## Open questions\n\n- **Sample roast and production roast.** No study consulted for this entry compared cupping results for the same lots roasted in a sample roaster and in a production roaster.\n- **Repeatability.** No study consulted for this entry reported batch-to-batch colour or roast-loss variation of a sample roaster, or the variation between the drums of one machine.\n- **Design and cup.** No peer-reviewed comparison of drum and hot-air sample roasters on cupping scores was found.\n- **Meter correlation.** The SCA states that it is researching how its roast-level parameters correlate.<sup><a href=\"#src-s2\">2</a></sup>\n- **Infrared and other designs.** No source consulted for this entry describes infrared sample roasters or measures their performance.\n\n## Key studies\n\n<div class=\"study\">\n<p><strong>Campo-Ceballos &amp; Gaviria-López, 2023 – Thirteen profiles on a gas sample drum.</strong> Roasts 200 g batches of one Cauca coffee on a gas-fired drum sample roaster with logged time and temperature, in a response-surface design. Table 1 logs drop times of 410–517 s, while the text gives 400–501 s and 420–501 s; the text reports a mean colour of 65 on the Agtron SCA scale, Table 1 per-roast values of 75–95. The roasts were fan-cooled; consumers rated acidity and body.</p>\n<p class=\"meta\">Czech Journal of Food Sciences 41(1), 64–72 · <a href=\"https://doi.org/10.17221/181/2022-CJFS\">doi:10.17221/181/2022-CJFS</a></p>\n</div>\n\n<div class=\"study\">\n<p><strong>Gómez Parra et al., 2023 – 300 sample roasts for near-infrared calibration.</strong> Roasts 100 Colombian coffees to three degrees on an electric sample roaster, starting at 200 °C. Each roast lasted 8–12 minutes, stopped by comparing the beans by eye with the Agtron/SCA colour chart.</p>\n<p class=\"meta\">Revista Cenicafé 74(1), e74104 · <a href=\"https://doi.org/10.38141/10778/74104\">doi:10.38141/10778/74104</a></p>\n</div>\n\n<div class=\"study\">\n<p><strong>Anokye-Bempah et al., 2024 – Small roasters versus commercial profiles.</strong> Studies titratable acidity on a 5 kg gas drum loaded with 4 kg. The introduction notes that most earlier work used small-scale roasters with 50–250 g batches at constant temperature, which may not reflect commercial roasting.</p>\n<p class=\"meta\">Scientific Reports 14, 8237 · <a href=\"https://doi.org/10.1038/s41598-024-57256-y\">doi:10.1038/s41598-024-57256-y</a></p>\n</div>\n\n<div class=\"study\">\n<p><strong>Debona et al., 2022 – Two small drums, same profiles.</strong> Roasts one arabica to baked, light, medium and dark profiles on two small LPG-heated drum roasters of different size. The two machines needed different times; Q grader scores did not differ significantly, while infrared spectra separated the profiles and showed a separation trend between the roasters.</p>\n<p class=\"meta\">Agronomy 12(11), 2880 · <a href=\"https://doi.org/10.3390/agronomy12112880\">doi:10.3390/agronomy12112880</a></p>\n</div>"
}